Phoenix Contact RIF-1-RSC-LDP-24DC/2X21/FG Series Interface Relay, DIN Rail Mount, 24V dc Coil, DPDT, 2-Pole

Bekijk deze categorie
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
RS-stocknr.:
175-0524
Fabrikantnummer:
2909848
Fabrikant:
Phoenix Contact
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Phoenix Contact

Coil Voltage

24V dc

Contact Configuration

DPDT

Mounting Type

DIN Rail

Series

RIF-1-RSC-LDP-24DC/2X21/FG

Number of Poles

2

Maximum Input Voltage

24V dc

Terminal Type

Screw

Switching Voltage

250V ac/dc

Depth

75mm

Height

89mm

Length

16mm

Contact Material

Silver Alloy

Input Current

30mA

Operating Temperature Range

-20 → +50°C

Life

10^7 (Mechanical) cycles

Maximum Operating Temperature

+50°C

Minimum Operating Temperature

-20°C

Dimensions

16 x 75 x 89mm

Special Features

IP20 Relay Base, Safe Isolation

Standards Met

DIN EN 50178/VDE 0160, EN 50205, UL 94

Relay Switching Classification

Pre-Assembled Relay Module

Land van herkomst:
CN

Phoenix Contact RIF-1-RSC


This time relay RIF-1-RSC-LDP-24DC/2X21/FG 2909848 from Phoenix Contact is the cost-effective alternative to a PLC

with easy configuration and fast wiring.

Features and Benefits


  • Pre-assembled relay module

  • Screw connection

  • Consists of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket

  • Contact type: 2 changeover contacts

  • Time-saving potential distribution, thanks to plug-in bridges

  • Protection against operating errors due to manual operation that is lockable via screwdriver

  • Quick and error-free connection to the controller via system cabling

Safety


When working on the products and the system, you must always keep the operating instructions and other items of product documentation to hand and follow them strictly.

Demands on the power supply


Only use power supply units that ensure safe isolation between the primary and secondary circuits according to EN 50178.

Applications


You can use the same electromechanical relay module design for both AC and DC switching module.

  • Electrical isolation

  • Voltage adjustment of frequently varying voltage levels

  • Power amplification

  • Signal multiplication in the case of relay modules with multiple contacts (e.g., for signal confirmations)

Approvals


IECEx, ATEX and Class 1 Zone 2

Gerelateerde Links