Onlangs gezocht

    Catu DT-300 Earth Tester 2kΩ CAT III

    RS-stocknr.:
    437-803
    Fabrikantnummer:
    DT300
    Fabrikant:
    Catu
    Catu
    Bekijk alle Earth Testers
    16 op voorraad - levertijd is 1 werkdag(en).
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    426,05 €

    (excl. BTW)

    515,52 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +426,05 €
    RS-stocknr.:
    437-803
    Fabrikantnummer:
    DT300
    Fabrikant:
    Catu
    Land van herkomst:
    FR

    Wetgeving en conformiteit

    Land van herkomst:
    FR

    Productomschrijving

    Catu Earth & Ground Resistance Tester


    The Catu earth and ground resistance tester measure a 1.999kΩ absolute maximum resistance and is having a CAT III safety category. This tester is used to ensure proper operation of the earthing system. It emits a sound signal for continuity checks and directly displays the value on the LED screen. It is also used to measure the electrical characteristics of a system. The measurement of the earth resistance, performed by this device, is based on the measurement principle called "fault loop". The measurement is carried out with an accuracy of (+/-3% +1 digit) on pure resistance, range of 0-200 Ω at 23 °C +/-5°C.


    Features and Benefits


    Available with a touch point on extension cord of 7m and instructions for use, without a case
    Displays the presence of Voltage and the phase position
    Measures the earth loop (fault loop) without tripping the circuit breakers: <15 mA
    Non-slip coating for a better grip
    Once connected to a properly connected installation, the earth value is displayed instantly on the top of the 4-digit LCD display that can indicate earth resistance values ranging between 0 and 100Ω in blue colour digits (at the 100 Ω threshold recommended by NF C 15-100) and between 101Ω and 1999Ω in red colour digits
    Operating temperature ranges between -150C and 450C
    Total autonomy (without battery)
    Two-way use: 2P + T socket or LV switchboard with cord


    Applications


    • Measurement of earth resistance.
    • Highlight phase position and check the presence of earthing connection.
    • Controls continuity of metal masses (buzzer).


    Features


    • Quick reading of conformity due to bicolor LCD Display (blue = OK/ red= no conformity).
    • "Default loop" principle using for earth measurement in TT schema.
    • Earth measurement with 3 1/2 digits LCD display (from 0 to 1999 Ω).
    • Accuracy: ± (3% + 1 digit) for pure resistance, range 0 to 200 Ω at 23°C ± 5°C.
    • Show presence of dangerous voltage (400 V - connection between phases).
    • Full autonomy: no battery, power supply by plugging on 2P+T outlet.


    Composition


    • 1 device
    • 1 roller with 7 m length cord M-921647 (not included in version DT-300-SE).
    • 1 user manual


    Optional Accessories


    • Cord for intervention on LV tables M-952271.


    Certifications


    EN 61557-4

    IEC 61010-1

    IK06 rated

    IP40 rated

    NF C15-100



    Specificaties

    KenmerkWaarde
    Absolute Maximum Resistance Measurement2kΩ
    Best Accuracy±3% + 1 Digit
    Display TypeLCD
    Safety CategoryCAT III
    Power SourceMains
    Weight340g
    Height51mm
    IncludesExtension Reel, Probe
    Length210mm
    Maximum Operating Temperature+45°C
    Measurement TypeEarth Resistance
    Model Number pDT-300
    Minimum Operating Temperature-15°C
    Width71mm
    16 op voorraad - levertijd is 1 werkdag(en).
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    426,05 €

    (excl. BTW)

    515,52 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +426,05 €