Onlangs gezocht

    Catu DT-155 Multifunction Tester, , Earth Resistance Measurement

    RS-stocknr.:
    309-5758
    Fabrikantnummer:
    DT-155
    Fabrikant:
    Catu
    Catu
    Bekijk alle Multifunction Testers
    2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    4 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    257,61 €

    (excl. BTW)

    311,71 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +257,61 €
    RS-stocknr.:
    309-5758
    Fabrikantnummer:
    DT-155
    Fabrikant:
    Catu

    N.v.t.

    Land van herkomst:
    FR

    Wetgeving en conformiteit

    N.v.t.

    Land van herkomst:
    FR

    Productomschrijving

    DT-155 Catu Electrical installation tester


    The Catu Electrical installation tester combines all essential functions to control and visualise instantly the quality and conformity of 230 V electrical installations. This tester immediately indicates whether the earth conductor in each of your sockets is connected.

    The DT-155 tester enables you to perform the presence of voltage at the terminals of a socket, integrity of the earth circuit, correct polarity the position of the phase and the neutral is indicated. It also uses to choose the correct operation of the ELCB system at the following sensitivities, 30 mA, 100 mA, 300 mA, 500 mA, 650 mA.


    Features and Benefits:


    • Fuse protection
    • Class I reinforcement insulation
    • Operating temperature is between -150C and 450C
    • Presence of voltage at the terminals of a socket
    • Possible detection of the signal with max network current of 80A
    • Operating voltage: 230 V ± 10%
    • Frequency: 50 / 60 Hz ± 10%
    • Operating temperature: - 15°C to + 45°C
    • IP 40 IK03
    • Fuse protection: 2 delayed fuses 250 mA


    Application


    The CATEX testers enable you to perform the following checks:
    • Presence of voltage at the terminals of a socket.
    • Integrity of the earth circuit.
    • Correct polarity. The position of the phase and the neutral is indicated.
    • Correct operation of the RCD system at the following sensitivities : 10 mA, 30 mA, 300 mA, 500 mA, 650 mA.


    The RCD check function is only applicable to single phase circuits: 230 V between phase and neutral.


    Optionnal Accessories


    • M-952271 (RS 702-6775): cord for intervention on LV tables.


    Certifications


    CE certified

    IEC 61010-1

    IK03 rated

    IP40 rated



    Specificaties

    KenmerkWaarde
    Maximum Voltage Measurement230V
    Earth Resistance MeasurementYes
    Continuity Test Current30 mA, 300 mA, 500 mA, 650 mA
    IP RatingIP40
    Model Number pDT-155
    2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    4 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    257,61 €

    (excl. BTW)

    311,71 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +257,61 €