Dormer HSS, 220mm Overall 14.5 mm 1
- RS-stocknr.:
- 268-6490
- Fabrikantnummer:
- A11014.5
- Fabrikant:
- Dormer
Subtotaal (1 eenheid)*
€ 62,97
(excl. BTW)
€ 76,19
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 2 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 62,97 |
*prijsindicatie
- RS-stocknr.:
- 268-6490
- Fabrikantnummer:
- A11014.5
- Fabrikant:
- Dormer
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Dormer | |
| Product Type | Drill Bit | |
| Material | HSS | |
| Overall Length | 220mm | |
| Flute Type | Spiral | |
| Number of Pieces | 1 | |
| Shank Type | Cylindrical/Straight | |
| Finish | Steam Tempered | |
| Drill Point Angle | 118° | |
| Drill Bit Size | 14.5mm | |
| Drilling Length | 144mm | |
| Cutting Direction | Right | |
| Standards/Approvals | ANSI, DIN 338, ISO | |
| Alles selecteren | ||
|---|---|---|
Merk Dormer | ||
Product Type Drill Bit | ||
Material HSS | ||
Overall Length 220mm | ||
Flute Type Spiral | ||
Number of Pieces 1 | ||
Shank Type Cylindrical/Straight | ||
Finish Steam Tempered | ||
Drill Point Angle 118° | ||
Drill Bit Size 14.5mm | ||
Drilling Length 144mm | ||
Cutting Direction Right | ||
Standards/Approvals ANSI, DIN 338, ISO | ||
Vrijgesteld
- Land van herkomst:
- BR
The Dormer Drill Bit is a long series drill with straight shank. It has diameter of 14.5 mm with an overall length of 220 mm and flute length of 144 mm according to DIN 340 standard with 118 degree point angle. The conventional 118 degree point provides strength and means an easy point to regrind. This drill bit HSS with steam tempered finish for 6xD drilling without pecking in steel.
Very cost effective
For drilling deeper holes
Suitable for both hand held and machine drilling
Steam tempered finish retains cutting fluid and prevents chip to tool welding