Dormer Solid Carbide, 151 mm Overall 12.7 mm
- RS-stocknr.:
- 274-520
- Fabrikantnummer:
- R0031/2
- Fabrikant:
- Dormer
Subtotaal (1 eenheid)*
€ 87,19
(excl. BTW)
€ 105,50
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 87,19 |
*prijsindicatie
- RS-stocknr.:
- 274-520
- Fabrikantnummer:
- R0031/2
- Fabrikant:
- Dormer
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Dormer | |
| Product Type | Drill Bit | |
| Material | Solid Carbide | |
| Flute Type | Spiral | |
| Overall Length | 151mm | |
| Shank Type | Cylindrical/Straight | |
| Finish | Tin | |
| Cutting Direction | Right | |
| Drilling Length | 100.8mm | |
| Drill Point Angle | 120° | |
| Drill Bit Size | 12.7 mm | |
| Standards/Approvals | ISO, ANSI | |
| Alles selecteren | ||
|---|---|---|
Merk Dormer | ||
Product Type Drill Bit | ||
Material Solid Carbide | ||
Flute Type Spiral | ||
Overall Length 151mm | ||
Shank Type Cylindrical/Straight | ||
Finish Tin | ||
Cutting Direction Right | ||
Drilling Length 100.8mm | ||
Drill Point Angle 120° | ||
Drill Bit Size 12.7 mm | ||
Standards/Approvals ISO, ANSI | ||
Vrijgesteld
- Land van herkomst:
- BR
The Dormer Tapping is designed for manual tapping using electric tools, and it addresses a common challenge in tapping, especially for blind holes. When tapping, long, stringy chips are often produced, and if not properly evacuated, they can cause serious issues. The helical flute design helps to move the chips away from the hole during tapping, preventing this problem.
Improved Chip Evacuation
Helical Flute Design
Gerelateerde Links
- Dormer Solid Carbide, 151 mm Overall
- Dormer Solid Carbide, 65 mm Overall
- Dormer Solid Carbide, 101 mm Overall 6.35 mm
- Dormer Solid Carbide, 43 mm Overall 1.588 mm
- Dormer Solid Carbide, 124 mm Overall 12.7 mm
- Dormer Solid Carbide, Solid Carbide, 34 mm Overall
- Dormer Carbide, 151 mm Overall 13 mm
- Dormer HSS, 12.7 mm Diameter, 151 mm Overall