RS PRO Carbide Tip Hammer 5.5 mm 1, 85mm Overall
- RS-stocknr.:
- 215-243
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 1,29
(excl. BTW)
€ 1,56
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 1,29 |
*prijsindicatie
- RS-stocknr.:
- 215-243
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Drill Bit | |
| Material | Carbide Tip | |
| Number of Flutes | 1 | |
| Sub Type | Hammer | |
| Overall Length | 85mm | |
| Flute Type | Straight | |
| Shank Type | Straight | |
| Number of Pieces | 1 | |
| Finish | Zinc Plated | |
| Cutting Direction | Neutral | |
| Drill Point Angle | 90° | |
| Drill Bit Size | 5.5mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Drill Bit | ||
Material Carbide Tip | ||
Number of Flutes 1 | ||
Sub Type Hammer | ||
Overall Length 85mm | ||
Flute Type Straight | ||
Shank Type Straight | ||
Number of Pieces 1 | ||
Finish Zinc Plated | ||
Cutting Direction Neutral | ||
Drill Point Angle 90° | ||
Drill Bit Size 5.5mm | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- CN
Rolled Forged
Rolled Flute; Copper Brazed Percussion Grade Carbide Tip
Straight Shank
Gerelateerde Links
- RS PRO Carbide Tip Hammer 5 mm 1, 85mm Overall
- RS PRO Carbide Tip Hammer 5.5 mm, 110mm Overall
- RS PRO Carbide Tip Hammer 5.5 mm, 160mm Overall
- RS PRO Carbide Tip Hammer 5.5 mm 1, 150mm Overall
- Bosch Carbide Tip Drill Bit 5.5 mm 1, 85mm Overall
- DeWALT Carbide Tip Masonry 5.5 mm, 85mm Overall
- CK Tungsten Carbide Tip Concrete Drill Bit 5.5 mm 10, 85mm Overall
- RS PRO Carbide Tip Hammer 6.5 mm, 160mm Overall