DeWALT for Metal, HSS-Co Bits
- RS-stocknr.:
- 678-3035
- Fabrikantnummer:
- DT4957-QZ
- Fabrikant:
- DeWALT
Subtotaal (1 eenheid)*
€ 167,72
(excl. BTW)
€ 202,94
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 80,00
Op voorraad
- 51 stuk(s) klaar voor verzending
- 152 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 167,72 |
*prijsindicatie
- RS-stocknr.:
- 678-3035
- Fabrikantnummer:
- DT4957-QZ
- Fabrikant:
- DeWALT
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | DeWALT | |
| Drilling Application | Metal | |
| Material | HSS-Co | |
| Alles selecteren | ||
|---|---|---|
Merk DeWALT | ||
Drilling Application Metal | ||
Material HSS-Co | ||
Vrijgesteld
- Land van herkomst:
- DE
Stanley Drill Bit Set, 13mm Maximum Size, 1mm Minimum Size - DT4957-QZ
This drill bit set is a 29-piece collection of twist drills intended for machining metal components in industrial and workshop settings. Manufactured from cobalt-alloyed high-speed steel, the set is designed for use with portable or bench-mounted drilling equipment when working with high-alloy steels and other demanding metallic materials.
Features & Benefits
• 5% cobalt HSS composition for elevated heat endurance and wear resistance
• Precision-ground DIN 338 geometry for accurate, centred starts
• Right-hand cutting helix to promote efficient chip evacuation
• Gold ferrous finish to reduce surface friction during drilling
• Extreme cobalt tip to minimise walking and improve first-cut accuracy
• Precision-ground DIN 338 geometry for accurate, centred starts
• Right-hand cutting helix to promote efficient chip evacuation
• Gold ferrous finish to reduce surface friction during drilling
• Extreme cobalt tip to minimise walking and improve first-cut accuracy
Applications
• Suitable for drilling stainless and chrome-nickel steels
• Ideal for machining heat- and acid-resistant steels
• Used for creating holes in cast-iron and bronze components
• Can be used on welded seams and high-strength alloys
• Ideal for machining heat- and acid-resistant steels
• Used for creating holes in cast-iron and bronze components
• Can be used on welded seams and high-strength alloys
What range of hole sizes does the set cover?
The kit spans metric diameters from 1mm up to 13mm, providing a wide selection for varied drilling tasks.
How does the tip design influence setup time?
The specialised tip reduces initial skidding, decreasing the need for centre-punching and shortening setup for repetitive operations.
Which drilling conditions suit these bits best?
They perform well at elevated cutting temperatures encountered when penetrating high-alloy steels, maintaining edge integrity under sustained loads.
How are chips handled during prolonged drilling?
The right-hand helix encourages consistent chip removal, lowering the risk of clogging in deep or continuous holes.
Gerelateerde Links
- DeWALT High Speed Steel Cobalt 29
- DeWALT High Speed Steel Cobalt HSS-E 29
- DeWALT High Speed Steel Cobalt 13 mm 29
- DeWALT 29-Piece Twist Set for Metal, 13 mm Max, 1 mm Min, High Speed Steel Bits
- DeWALT High Speed Steel Cobalt 13 mm
- DeWALT 19-Piece Twist Set for Metal, 10 mm Max, 1 mm Min, High Speed Steel Bits
- DeWALT 10-Piece Twist Set for Metal, 10 mm Max, 1 mm Min, High Speed Steel Bits
- DeWALT 13-Piece Twist Set for Metal, 6.5 mm Max, 1.5 mm Min, High Speed Steel Bits