Knipex Hand Ratcheting Crimping Tool for Bootlace Ferrule, 0.08 → 10mm² Wire

Self-adjusting wire end ferrule tool with front operation
As opposed to front entry, single-sided open profile enables a contact from 0.08 → 2.5 mm² to be input from the side (improved access)
Adjusts automatically to different cable cross-sections
Produces a square crimp profile and therefore free position selection when mounted
Automatic lock for reliable crimping in accordance with DIN standards (unlockable)
Crimp pressure is set and calibrated in the factory
Easy-to-use shape with ergonomic handles
Crimping in one profile from 0.08 → 10 mm²

● Compression from 0.08 - 10.0 mm² in one profile
● Wire ferrules up to 2.5 mm² can also be loaded parallel from the side
● Suitable in particular for all twin wire ferrules up to 2 x 4 mm² or 2 x AWG 12
● For crimping wire ferrules according to DIN 46228 parts 1 + 4
● Self-adjusting adaptation to the desired wire ferrule size: no wrong crimps caused by using the wrong die
● Frontal insertion of the wire ferrules into the pliers
● Repetitive, high crimping quality due to integral lock (self-releasing mechanism)
● Tools have been set precisely (calibrated) in the factory
● Optimum transmission of force thanks to toggle lever for fatigue reduced operation
● Handy shape and low weight provide high operation comfort
● Capacities mm² / AWG : 0.08 to 10 mm². AWG 28 to 7
● Material : special grade chrome vanadium electrical steel, oil quenched