CK Crimp Tool Crimp Tool for Wire Ferrules

Bekijk alle Crimp Tools

Subtotaal (1 eenheid)*

€ 49,38

(excl. BTW)

€ 59,75

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 10 stuk(s) vanaf 02 februari 2026
  • Plus verzending 16 stuk(s) vanaf 02 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 49,38

*prijsindicatie

RS-stocknr.:
344-3185
Artikelnummer Distrelec:
180-48-080
Fabrikantnummer:
430005
Fabrikant:
CK
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

CK

Product Type

Crimp Tool

Sub Type

Crimp Tool

For Use With

Wire Ferrules

Handle Type

Anti-Slip, Soft Grip

Standards/Approvals

Tested to 40, guaranteed for 30, 000 cycles

Vrijgesteld

Land van herkomst:
DE

Crimp tool for terminals and ends


C.K Crimping Pliers are high-quality have been designed for professionals and serious DIY enthusiast. They are suitable for crimping bootlace ferrules. A frame made from hardened and tempered high alloy carbon steel, offer a long life and hassle-free operation. Pliers are matt chrome plated to ensure an increased corrosion protection. Especially shaped handles guarantee an anti-slip, safe and comfortable grip.

Features and Benefits:

• A highly durable hand tool designed for professional use

• Frame made from hardened and tempered high alloy carbon steel for improved durability and long life operation

• Contoured grips with anti-slip horns for safety and comfortable operation

• Anti-corrosion protected

• Capacity: 0,25-2,5 mm² / AWG 23-13

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQ's:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Gerelateerde Links