RS PRO Crimp Tool Crimp Tool for Crimp Contacts

Afbeelding representeert productcategorie

Bekijk alle Crimp Tools

Subtotaal (1 eenheid)*

€ 349,86

(excl. BTW)

€ 423,33

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 49 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 15 stuk(s) vanaf 26 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 349,86

*prijsindicatie

RS-stocknr.:
531-403
Artikelnummer Distrelec:
304-04-324
Fabrikant:
RS PRO
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

RS PRO

Product Type

Crimp Tool

Sub Type

Crimp Tool

For Use With

Crimp Contacts

Height Safe

No

Overall Length

190mm

Adjustable Ratchet

No

Standards/Approvals

MIL-C-22520/2

Minimum Wire Size AWG

26

Maximum Wire Size mm²

1.29

Maximum Wire Size AWG

16

Minimum Wire Size mm²

0.4

Vrijgesteld

Land van herkomst:
GB

RS PRO Indent Crimp Tool


RS PRO 8-indent crimp tool designed around MIL-C-2250/2 (setting 3 upwards). Lightweight and easy to operate, the positioners set the crimp contact barrel at the correct height for crimping. This professional hand tool offers wire range size of 26 AWG to 16 AWG.

Features and Benefits:

Tool: nickel plated steel finish

Blue plastic handle grip

Positioners are anodised and fixed to the tool using a bayonet action

Width: 40 mm

Wire size: 26 to 16 AWG

Typical Applications

Crimping tools can be used for a variety of applications:-

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQs:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How to maintain the product?

• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to dirt or other contaminants

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

*Use a light mineral-free oil

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical

Gerelateerde Links