RS PRO V9011 Crimp Tool Crimp Tool for Crimp Contacts

Bekijk alle Crimp Tools

Subtotaal (1 eenheid)*

€ 252,92

(excl. BTW)

€ 306,03

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 13 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 10 stuk(s) vanaf 23 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 252,92

*prijsindicatie

RS-stocknr.:
821-611
Artikelnummer Distrelec:
304-04-351
Fabrikant:
RS PRO
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

RS PRO

Product Type

Crimp Tool

Sub Type

Crimp Tool

For Use With

Crimp Contacts

Height Safe

No

Series

V9011

Overall Length

200mm

Standards/Approvals

No

Minimum Wire Size AWG

38

Minimum Wire Size mm²

0.254

Maximum Wire Size mm²

1.02

Maximum Wire Size AWG

18

Vrijgesteld

Land van herkomst:
GB

RS PRO Ratchet Crimping Tool for Crimp Terminal, 38AWG to 18AWG


This RS PRO crimp tool has a locator on the tool positions contacts in the tool jaws to give an easy consistent crimp action. A contact extraction tool is available for servicing connectors during maintenance and modifications. The operating instructions are included with both tools. This tool supports a wire size of 38 to 18 AWG.

Features and Benefits:


• High pin counts - 60, 96, 156, 260 and 360 ways

• Provides long life of 10000 mating cycles

• Cam actuated zero insertion force coupling

• Back shell/strain relief and polarisation options

• Metal and plastic plug and socket bodies

• Metal products have excellent shielding properties

• Standard and low current contacts available

Typical Applications


Crimping tools can be used for a variety of applications:-

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQs:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How to maintain the product?

• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to dirt or other contaminants

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

*Use a light mineral-free oil

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Gerelateerde Links