RS PRO HSS Drill Bit, 20.5mm Head, 3 Flute(s), 90°, 1 Piece(s)
- RS-stocknr.:
- 673-8710
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 27,80
(excl. BTW)
€ 33,64
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 27,80 |
*prijsindicatie
- RS-stocknr.:
- 673-8710
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Drill Bit Type | Countersink | |
| Head Diameter | 20.5mm | |
| Countersink Angle | 90° | |
| Number of Flutes | 3 | |
| Material | HSS | |
| Overall Length | 63 mm | |
| Shank Diameter | 10 mm | |
| Number of Pieces | 1 | |
| Shank Length | 42mm | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Drill Bit Type Countersink | ||
Head Diameter 20.5mm | ||
Countersink Angle 90° | ||
Number of Flutes 3 | ||
Material HSS | ||
Overall Length 63 mm | ||
Shank Diameter 10 mm | ||
Number of Pieces 1 | ||
Shank Length 42mm | ||
Vrijgesteld
- Land van herkomst:
- CN
RS PRO Countersink 63 mm x 20.5 mm 1 Piece
If you need an easy way to install countersunk screws, choose this countersink drill bit from RS PRO. It creates a crater at the surface of a conventional drilled hole so you can fully embed your countersunk screws in a surface.
The shaft of the drill bit fits into your drill driver securely and is thick enough to withstand high-pressure drilling into dense materials. The hexagonal end cuts through the surface material and shaves away the edges as the end thickens out, leaving a smooth, clean hole.
The end has three flutes to reduce vibration for greater precision during use. Use this drill bit at slower speeds for extra steadiness and accuracy. You can also use it after regular drilling to remove tough burr distortions at the surface of the hole.
The shaft of the drill bit fits into your drill driver securely and is thick enough to withstand high-pressure drilling into dense materials. The hexagonal end cuts through the surface material and shaves away the edges as the end thickens out, leaving a smooth, clean hole.
The end has three flutes to reduce vibration for greater precision during use. Use this drill bit at slower speeds for extra steadiness and accuracy. You can also use it after regular drilling to remove tough burr distortions at the surface of the hole.
Features and Benefits
• Countersink drill bit type
• Countersink angle of 90º
• High-speed steel (HSS) material
• Three flutes
• One piece
• Head diameter of 20.5 mm
• Overall length of 63 mm
• Shank diameter of 10 mm
• Shank length of 42 mm
• Countersink angle of 90º
• High-speed steel (HSS) material
• Three flutes
• One piece
• Head diameter of 20.5 mm
• Overall length of 63 mm
• Shank diameter of 10 mm
• Shank length of 42 mm
Gerelateerde Links
- Dormer HSS Drill Bit, 20.5mm Head, 3 Flute(s), 90°, 1 Piece(s)
- EXACT HSS Drill Bit, 20.5mm Head, 3 Flute(s), 90°, 1 Piece(s)
- RS PRO HSS Drill Bit, 20.5mm Head, 3 Flute(s), 90°, 1 Piece(s)
- EXACT HSS-E Drill Bit, 20.5mm Head, 3 Flute(s), 90°, 1 Piece(s)
- Dormer HSS-E Drill Bit, 20.5mm Head, 3 Flute(s), 90°, 1 Piece(s)
- EXACT HSS Countersink Drill Bit Set, 20.5mm Head, 3 Flute(s), 90°, 9 Piece(s)
- Dormer HSS Countersink Drill Bit Set, 6.3 - 20.5mm Head, 3 Flute(s), 90°, 6 Piece(s)
- Dormer HSS Countersink, 20.5mm Head, 3 Flute(s), 90°, 1 Piece(s)