NeoCortec NeoMesh NC1000C-8 NC100-8 Wireless Mesh Evaluation Kit for Advanced Metering Infrastructure, Mobile Ad-Hoc

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 339,02

(excl. BTW)

€ 410,21

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks
Per stuk
1 +€ 339,02

*prijsindicatie

RS-stocknr.:
195-8823
Fabrikantnummer:
EVALNC1000C-8
Fabrikant:
NeoCortec
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

NeoCortec

Kit Classification

Evaluation Kit

RF Technology

Wireless Mesh

Product Type

Communication & Wireless Development Tool

Technology

NeoMesh Protocol

For Use With

Advanced Metering Infrastructure, Mobile Ad-Hoc Networks, Wireless Sensor Networks, Home Control and Building Automation, Alarm and Security Systems, Industrial Automation, Automatic Meter Reading, Agricultural and Forest Monitoring

Featured Device

NC100-8

Kit Name

NeoMesh NC1000C-8

Maximum Frequency

915MHz

Interface Type

UART

Standards/Approvals

FCC part 15.247, EN 62368-1:2014, EN 301 489-3 V2.1.1, IC, ETSI, EN 300 220-2 V3.1.1, FCC, EN 301 489-1 V2.2.0, EN 62479:2010

Vrijgesteld

To get you started evaluating the NeoCortec Wireless Mesh Networking Protocol, we have designed an evaluation kit, which will take you through a few easy steps to start sending payload data from one PC to another through the NeoCortec network.

Once the basic steps have been completed, you can start building your own application: We have designed the evaluation board such that you can easily interface to your favourite host controller:

  • USB link to a PC with 2 virtual COM ports. An Application Port to be used for sending and receiving payload data. A System Port to be used for setting the configuration parameters as well as uploading new software releases should they become available.

  • Pin headers allow for easy integration to MCU eval boards or other development boards such as Arduino and similar. In addition to this, the evaluation boards are equipped with Temperature & Humidity sensor, Potentiometer to generate a analog input signal to the build-in A/D converter. Finally there is a series of LEDs which can easily be connected to the GPIOs of the modules to test the digital outputs. The evaluation kit comes with a USB stick, which includes PC tools for sending and receiving payload data through the wireless mesh network, and for configuring and updating the software inside the module. The evaluation kit contains 5 pcs of evaluation boards with the NCxxxx modules installed.

    • Gerelateerde Links