Renesas Electronics 8T49N241-998NLGI Clock Generator, 40-Pin 4 VFQFN

Bekijk deze categorie
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 10,43

(excl. BTW)

€ 12,62

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Laatste voorraad RS
  • Laatste 402 stuk(s), klaar voor verzending vanaf een andere locatie
Aantal stuks
Per stuk
1 - 9€ 10,43
10 - 24€ 9,58
25 - 49€ 9,20
50 - 99€ 8,83
100 +€ 8,10

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
216-6235
Fabrikantnummer:
8T49N241-998NLGI
Fabrikant:
Renesas Electronics
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Renesas Electronics

Product Type

Clock Generator

Mount Type

Surface

Package Type

VFQFN

Pin Count

40

Minimum Supply Voltage

2.5V

Maximum Supply Voltage

3.3V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Height

0.9mm

Length

6mm

Width

6 mm

Series

8T49N241

Standards/Approvals

No

Number of Outputs

4

Automotive Standard

No

Maximum Output Frequency

1GHz

The Renesas Electronics 8T49N241 has one fractional-feedback PLL that can be used as a jitter attenuator and frequency translator. It is equipped with one integer and three fractional output dividers, allowing the generation of up to four different output frequencies, ranging from 8kHz to 1GHz. These frequencies are completely independent of each other, the input reference frequencies, and the crystal reference frequency. The device places virtually no constraints on input to output frequency conversion, supporting all FEC rates, including the new revision of ITU-T Recommendation G.709 (2009), most with 0ppm conversion error. The outputs may select among LVPECL, LVDS, HCSL or LVCMOS output levels.

Supports SDH/SONET and Synchronous Ethernet clocks including all FEC rate conversions

0.35ps RMS Typical Jitter (including spurs): 12kHz to 20MHz

Operating Modes: Synthesizer, Jitter Attenuator

Operates from a 10MHz to 50MHz fundamental-mode crystal or a 10MHz to 125MHz external oscillator

Initial holdover accuracy of +50ppb.

Accepts up to 2 LVPECL, LVDS, LVHSTL or LVCMOS input clocks

Accepts frequencies ranging from 8kHz to 875MHz

Auto and manual clock selection with hitless switching

Clock input monitoring including support for gapped clocks

Phase-slope limiting and fully hitless switching options to control output clock phase transients

Generates four LVPECL / LVDS / HCSL or eight LVCMOS output clocks

Output frequencies ranging from 8kHz up to 1.0GHz (differential)

Gerelateerde Links