Igus 15 Black, W49mm x D24 mm, L1000.00 mm, 48 mm Min. Bend Radius, Igumid GLW

This rod end provides a compact, polymer bearing joint designed for linkage and pivot applications in industrial systems. It interfaces with metric threaded components and offers a corrosion-resistant alternative to metal bearings for environments where temperature extremes and consistent static loads are factors.

• 6mm bore with M6 female thread for simple integration
• Right-hand metric threading for standardised fastenings
• Igumid G polymer construction reduces maintenance needs
• Static load capacity of 750N supports moderate load points
• Operates up to +180°C for high-temperature cycles
• Functional down to -40°C for low-temperature performance

• Suitable for robotic arm linkages in automation cells
• Ideal for sensor mounts in electronics assemblies
• Used for hinge pivots in electrical cabinet fittings
• Can be used for light-duty actuation linkages in mechanical systems

The bearing bush is made from a high-performance Igumid G plastic that offers low friction and good wear resistance against steel mating pins.

Choose it for pivot points where static loads do not exceed 750N and where oscillatory rather than continuous sliding motion is present.

The internal thread follows metric right-hand standards and requires compatible M6 external threads for correct engagement.

The polymer formulation remains dimensionally stable between -40°C and +180°C, so longevity depends on load cycles rather than modest thermal exposure.