Energizer A76 Button Battery, 1.5 V, 11.6 mm Diameter, 2 Pack

Subtotaal (1 verpakking van 2 eenheden)*

€ 1,37

(excl. BTW)

€ 1,66

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 119 stuk(s) vanaf 12 oktober 2026
  • Plus verzending 738 stuk(s) vanaf 12 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Verpakking(en)
Per verpakking
Per stuk*
1 +€ 1,37€ 0,685

*prijsindicatie

RS-stocknr.:
683-377
Fabrikantnummer:
7638900083071
Fabrikant:
Energizer
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Energizer

Battery Size

A76

Product Type

Button Battery

Chemistry

Manganese Dioxide

Nominal Voltage

1.5V

Battery Capacity

175mAh

Diameter

11.6mm

Number of Batteries

2

NEDA Code

1166 A

Termination Type

Flat Contact

Weight

1.85g

Standards/Approvals

No

IEC Code

Iec-Lr44

Vrijgesteld

Land van herkomst:
CN

Energizer Button Battery, 1.5V Nominal Voltage, 175mAh Capacity - 7638900083071


This button battery is a small 1.5V coin cell designed to supply portable electronic devices that require compact, steady power. It uses a manganese dioxide chemical system and is intended for applications that demand continuous low-drain operation with occasional high-rate pulses. The pack contains two cells and is suited to items where long service life at light loads is important.

Features and Benefits:


• 175mAh capacity provides extended runtime under light loads
• 1.5V nominal output maintains stable voltage for electronics
• Flat contact termination enables simple device installation
• Low impedance (5-15Ω at 40Hz) supports Pulse currents
• Typical weight 1.85g minimises added device mass

Applications


• Suitable for watches and small timing devices
• Suitable for handheld calculators and remote controls
• Used with small toys requiring Compact power sources
• Used for medical instruments with low continuous drain
• Can be used for LED indicators and small sensors

How long will the cell operate under continuous light load?


At a continuous drain of 0.191mA (6.8KΩ load) it provides about 915 hours to 0.9V.

What happens to the cell as it discharges?


The cell may bulge during discharge but will not exceed its specified maximum height.

How is capacity measured for these cells?


Capacity is determined at 21°C using a 6.8KΩ continuous drain until cut‑off at 0.9V.

What is the typical internal impedance and its significance?


Measured at 40Hz, impedance ranges 5-15Ω which allows brief high-rate pulses while supplying low-drain devices.

What form factor and chemistry should be expected?


The cells use a manganese dioxide system in a miniature coin format with flat contacts for installation.

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.