ABB Moulded EPD24 EPD-SB Busbar, 24 V

Bekijk alle Busbars

Subtotaal (1 eenheid)*

€ 5,71

(excl. BTW)

€ 6,91

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Voorradig bij de fabrikant
  • Klaar voor verzending vanaf 04 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 5,71

*prijsindicatie

RS-stocknr.:
914-4623
Fabrikantnummer:
2CDE605200R0021 EPD-SB21
Fabrikant:
ABB
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

ABB

Product Type

Busbar

Rated Operational Voltage

24 V

Material

Moulded

Range

EPD24

For Use With

EPD24-TB-101

Standards/Approvals

UL 508, UL 2367, CSA C22.2 No. 14, CSA C22.2 No. 213, UL 1604, CSA C22.2 No. 142

Series

EPD-SB

Colour

Grey

Land van herkomst:
DE

EPD24 Series Electronic Protection Device


ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.

If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.

Selective load protection

Reliable overload disconnection with 1.1 x Input plus

Manual ON/OFF button

Clear status and failure indication through LED and integrated auxiliary contact

Integral fail-safe element adjusted to current rating

Width per unit only 12.5 mm

DIN rail mounting

Easy wiring through busbar LINE+ and 0 V as well as signal bars

Gerelateerde Links