Power Integrations, AC/DC Converter 2.5 A, 12 V 12-Pin

Bekijk alle AC-DC Converters

Subtotaal (1 tube van 48 eenheden)*

€ 40,128

(excl. BTW)

€ 48,576

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 6.432 stuk(s) vanaf 22 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per tube*
48 +€ 0,836€ 40,13

*prijsindicatie

RS-stocknr.:
146-2454
Fabrikantnummer:
LNK6773V
Fabrikant:
Power Integrations
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Power Integrations

Product Type

AC/DC Converter

Maximum Input Voltage

265V ac

Maximum Output Voltage

12V

Mount Type

Through Hole

Output Power

15W

Pin Count

12

Switching Frequency

32kHz

Maximum Output Current

2.5A

Minimum Input Voltage

85V ac

Topology

Flyback

Minimum Operating Temperature

-40°C

Maximum Duty Cycle

66%

Maximum Operating Temperature

150°C

Length

10.16mm

Standards/Approvals

No

Height

2.34mm

Width

8.89 mm

Series

LinkSwitch-HP

Automotive Standard

No

Supply Current

1.3mA

Land van herkomst:
CN

LinkSwitch-HP series Offline AC-DC Converters


The Power Integrations LinkSwitch-HP family of flyback power supply ICs incorporate a primary side regulated controller and high-voltage power MOSFET in a single package. These devices feature ±5% CV accuracy, selectable current limit, programmable latching or hysteretic over-voltage, under-voltage and over-temperature protection, fast AC reset, and programmable shutdown delay time.

Package options:

• eSIP-7C package for vertical orientation with minimum PCB footprint size and simple heat sink mounting using clip or adhesive pad

• eSOP-12B package for low-profile surface mounted ultra-thin designs with heat transfer to PCB via exposed pad and SOURCE pins; both wave and IR reflow soldering supported

• eDIP-12B package for low-profile through-hole mounted ultra-thin designs with heat transfer to PCB via exposed pad or optional metal heat sink

• Multi-mode control maximizes efficiency over full load range

• No-load consumption below 30 mW at 230 VAC

• >75% efficiency with 1 W input at 230 VAC

• >50% efficiency with 0.1 W input at 230 VAC

• Dramatically simplifies power supply designs

• Eliminates opto-coupler and all secondary control circuitry

• ±5% or better output voltage tolerance

• 132 kHz operation reduces transformer and power supply size

• Compensation over line limits overload power

• Frequency jittering reduces EMI filter cost

• Fully integrated soft-start for minimum start-up stress

• Auto-restart limits power delivery to 3% during overload faults

AC-DC Converters, Power Integrations


Gerelateerde Links