Power Integrations, AC/DC Converter 2.5 A, 12 V 6-Pin, eSIP-7C

Bekijk alle AC-DC Converters

Subtotaal 5 eenheden (geleverd in een buis)*

€ 6,12

(excl. BTW)

€ 7,405

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 16 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
5 +€ 1,224

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
123-5408P
Fabrikantnummer:
LNK6777E
Fabrikant:
Power Integrations
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Power Integrations

Product Type

AC/DC Converter

Maximum Input Voltage

265V ac

Maximum Output Voltage

12V

Mount Type

Through Hole

Output Power

15W

Pin Count

6

Switching Frequency

32kHz

Maximum Output Current

2.5A

Package Type

eSIP-7C

Minimum Input Voltage

85V ac

Topology

Flyback

Minimum Operating Temperature

-40°C

Maximum Duty Cycle

66%

Maximum Operating Temperature

150°C

Length

10.24mm

Series

LinkSwitch-HP

Height

8.25mm

Width

2.06 mm

Standards/Approvals

No

Supply Current

1.3mA

Automotive Standard

No

LinkSwitch-HP series Offline AC-DC Converters


The Power Integrations LinkSwitch-HP family of flyback power supply ICs incorporate a primary side regulated controller and high-voltage power MOSFET in a single package. These devices feature ±5% CV accuracy, selectable current limit, programmable latching or hysteretic over-voltage, under-voltage and over-temperature protection, fast AC reset, and programmable shutdown delay time.

Package options:

• eSIP-7C package for vertical orientation with minimum PCB footprint size and simple heat sink mounting using clip or adhesive pad

• eSOP-12B package for low-profile surface mounted ultra-thin designs with heat transfer to PCB via exposed pad and SOURCE pins; both wave and IR reflow soldering supported

• eDIP-12B package for low-profile through-hole mounted ultra-thin designs with heat transfer to PCB via exposed pad or optional metal heat sink

• Multi-mode control maximizes efficiency over full load range

• No-load consumption below 30 mW at 230 VAC

• >75% efficiency with 1 W input at 230 VAC

• >50% efficiency with 0.1 W input at 230 VAC

• Dramatically simplifies power supply designs

• Eliminates opto-coupler and all secondary control circuitry

• ±5% or better output voltage tolerance

• 132 kHz operation reduces transformer and power supply size

• Compensation over line limits overload power

• Frequency jittering reduces EMI filter cost

• Fully integrated soft-start for minimum start-up stress

• Auto-restart limits power delivery to 3% during overload faults

AC-DC Converters, Power Integrations


Gerelateerde Links