Surface Mount Fixed Resistors

Resistors are referred to as a Passive Component. Surface Mount Resistors are more commonly known as SMD (surface mount device) or SMT (Surface mount technology) Resistors. These resistors offer advantages in space saving on Printed Circuit Boards (PCB’s).


Some common package sizes are 0201,0402,0603,0805,1206,1210,2020,2512


SMD Resistors are used in large volumes and are the preferred choice in electronics equipment due to their small size and high reliability. SMD resistors are particularly used in telecommunication, automotive (AEC Q200 qualified) and medical equipment, they also found in personal devices, displays and advanced technology research instruments.


SMD Fixed Resistors


Surface mount fixed resistors are the most widely used resistors as they reduce the flow of the electrical current in circuits. Similar to water flowing along a pipe, the tap controls the flow of water, a resistor controls the flow of current. They work to a fixed value the resistance does not change in temperature or voltage. The most commonly used fixed resistors values are 100KΩ,10kΩ,100Ω, 10Ω


Types of surface mount fixed resistors


  • Thin Film Resistors have a higher precision than the thick film

  • Thick Film Resistors are used for general use due to a lower price point.

  • Moulded Wirewound Resistors offer higher power

  • Foil Resistors for ultra-high precision and really low-Temperature coefficient of resistance

  • Shunts (current sense) Low ohmic values for where current measurement is critical

  • Melf (cylindrical) offering superb pulse load capability

What are surface mount fixed resistors used for?


SMD fixed resistors are very compact and used in most electronic board design. Due to their compact size and the continuous development of ever smaller footprints, this has allowed for the development of ever smaller PCB designs and the ability to get more from the board. The resistors can assist in the reduction of component count on the board.


High Power / Surge / pulse protection


Many manufacturers offer a higher power alternative for the various packages they have available. As an example the 0603 resistor package can vary from 0.1W to 0.25W (rated dissipation 70°C). The higher power alternatives can be used in applications where there is a need to protect against surges / pulses.


What is the difference between Thin Film Resistors and Thick Film Resistors?


The main difference being that the thick film resistors have a paste fired on to the manufacturers chosen substrate. Thin film resistors as the name suggests has an extremely thin metal film that is generally vacuum deposited on to the manufacturers chosen substrate.


...
Lees meer Lees minder

Filters

1 - 20 van 31253 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Resistance Package/Case Technology Tolerance Power Rating Temperature Coefficient Automotive Standard Dimensions Length Depth Height Series Minimum Operating Temperature Maximum Operating Temperature
RS-stocknr. 804-8909
FabrikantRS PRO
0,002 €
Each (On a Reel of 5000)
Aantal stuks
4.7kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS-stocknr. 737-9120
FabrikantRS PRO
0,004 €
Each (On a Reel of 10000)
Aantal stuks
10kΩ 0402 (1005M) Thick Film ±1% 0.063W ±100ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 713-1202
FabrikantRS PRO
0,002 €
Each (On a Reel of 5000)
Aantal stuks
4.7Ω 1206 (3216M) Thick Film ±5% 0.25W ±200ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 802-9539
FabrikantRS PRO
0,004 €
Each (On a Reel of 5000)
Aantal stuks
100Ω 0603 (1608M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - - -55°C +155°C
RS-stocknr. 804-8779
FabrikantRS PRO
0,002 €
Each (On a Reel of 5000)
Aantal stuks
130Ω 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS-stocknr. 804-7173
FabrikantRS PRO
0,001 €
Each (On a Reel of 10000)
Aantal stuks
2.2kΩ 0402 (1005M) Thick Film ±1% 0.063W ±100ppm/°C - - - - - - -55°C +155°C
RS-stocknr. 717-0957
FabrikantRS PRO
0,002 €
Each (On a Reel of 5000)
Aantal stuks
8.66kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 717-1089
FabrikantRS PRO
0,001 €
Each (On a Reel of 5000)
Aantal stuks
24.9kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 804-6528
FabrikantRS PRO
0,003 €
Each (On a Reel of 5000)
Aantal stuks
10kΩ 0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - - -55°C +155°C
RS-stocknr. 713-6692
FabrikantRS PRO
0,002 €
Each (On a Reel of 5000)
Aantal stuks
0805 (2012M) Thick Film ±5% 0.125W ±200ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 804-8845
FabrikantRS PRO
0,002 €
Each (On a Reel of 5000)
Aantal stuks
1kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS-stocknr. 717-0783
FabrikantRS PRO
0,001 €
Each (On a Reel of 5000)
Aantal stuks
2.49kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 717-1572
FabrikantRS PRO
0,005 €
Each (On a Reel of 5000)
Aantal stuks
0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 717-1033
FabrikantRS PRO
0,001 €
Each (On a Reel of 5000)
Aantal stuks
17.4kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 804-8873
FabrikantRS PRO
0,002 €
Each (On a Reel of 5000)
Aantal stuks
2kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS-stocknr. 713-4090
FabrikantRS PRO
0,001 €
Each (On a Reel of 5000)
Aantal stuks
56Ω 0603 (1608M) Thick Film ±5% 0.1W ±200ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 713-4141
FabrikantRS PRO
0,002 €
Each (On a Reel of 5000)
Aantal stuks
1kΩ 0603 (1608M) Thick Film ±5% 0.1W ±200ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 717-5808
FabrikantRS PRO
0,005 €
Each (On a Reel of 5000)
Aantal stuks
3.92kΩ 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - RS -55°C +155°C
RS-stocknr. 804-6616
FabrikantRS PRO
0,002 €
Each (On a Reel of 5000)
Aantal stuks
110kΩ 0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - - -55°C +155°C
RS-stocknr. 717-1014
FabrikantRS PRO
0,005 €
Each (On a Reel of 5000)
Aantal stuks
14kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - RS -55°C +155°C
Related Products
ERJ A1 high-power chip resistors from Panasonic feature ...
Description:
ERJ A1 high-power chip resistors from Panasonic feature a wide terminal construction. This allows for excellent heat dissipation and ensures the reliability of solder joints. AEC-Q200 qualifiedCurrent sensing.
Panasonic ERJ 3R 0603 metal film resistors provide ...
Description:
Panasonic ERJ 3R 0603 metal film resistors provide a lightweight, compact solution. Constructed from three layers of electrodes and a metal glaze thick film resistive element, these chip resistors are highly reliable. Suitable for both flow soldering and reflow solderingResistance ...
Panasonic ERJ 3B thick film chip resistors are ...
Description:
Panasonic ERJ 3B thick film chip resistors are lightweight and compact. Constructed from three layers of electrodes and a metal glaze thick film resistive element, these resistors are highly reliable. AEC-Q200 qualifiedCurrent sensingSmall sizeLow-resistance valueSuitable for both flow and reflow ...
Panasonic ERJ 2GE metal film resistors are compact ...
Description:
Panasonic ERJ 2GE metal film resistors are compact and lightweight. Constructed from three layers of electrodes and a metal glaze thick film resistive element, these 0402 size chip resistors are highly reliable. Suitable for both flow soldering and reflow solderingResistance ...