John Drummond DRUMTL20, LED Voltage tester, 500V ac/dc, Mains Powered, CAT III 1000V With RS Calibration

Bekijk alle Voltage Testers

Subtotaal (1 eenheid)*

€ 179,04

(excl. BTW)

€ 216,64

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 7 stuk(s) klaar voor verzending
  • Plus verzending 4 stuk(s) vanaf 06 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 179,04

*prijsindicatie

RS-stocknr.:
706-8716
Fabrikantnummer:
DRUMTL20
Fabrikant:
John Drummond
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

John Drummond

Maximum Voltage

500V ac/dc

Safety Category

CAT III 1000 V, CAT IV 600V

Display Type

LED

IP Rating

IP67

Calibrated

RSCAL

Power Source

Mains

Dimensions

213 x 112 x 72mm

Weight

350g

Height

72mm

Length

213mm

Maximum Operating Temperature

+55°C

Width

112mm

Safety Category Level

CAT III, CAT IV

Model Number p

DRUMTL20

Minimum Operating Temperature

-10°C

Safety Category Voltage

600 V, 1000 V

Vrijgesteld

Land van herkomst:
PH

Drummond Test Lamp MTL20


Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Additional two button test allows the unit to draw a high current to differentiate between potentially hazardous phantom voltages and hazardous persistent voltages
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.

Supplied with

Right angled probe tip, two straight tips and instructions

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.


Mains Voltage Indicators - Contact

Gerelateerde Links