Fluke T6-1000, LCD Voltage Tester, 1000V, Battery Powered CAT IV, CAT III, T6-1000

Searching for a safe way to take electrical readings in a crowded control cabinet? This voltage tester from FLUKE measures up. Thanks to the open-fork design, it gives you accurate results with no need for test leads or even direct contact with live wires. This not only saves you time hunting through cables in search of an accessible contact point, but also reduces the possibility of arc flash for maximum user protection. The easy-to-read backlit display means you won't have to squint in poor lighting conditions. For hassle-free troubleshooting, it shows both voltage and current simultaneously to give you all the information you need in one place.

• 17.8mm fork is the widest in the industry so it can fit around chunky cables

• Industrial and commercial wiring installations

Electricians often work in boxes jammed with wires where finding a safe metallic contact point can be a challenge. With the T6-1000 you take measurements by sliding a single wire into the open fork.

Not usually. This nifty gadget normally earths safely through your hand and body, but if you're wearing gloves or otherwise insulated from the ground, you'll need to earth it externally through a test lead.

The Fluke T6-100 lets you measure voltages without using test leads. We know working in electrical boxes jammed with wires can be challenging when you’re trying to find a safe metallic contact point. Now with Fluke’s T6-600 or T6-1000 with integrated FieldSense technology you can quickly and easily take measurements by sliding the open fork over a conductor to see the voltage level without the need for test leads.

FieldSense technology is truly a breakthrough in how voltage is measured. While other open fork testers detect a magnetic field to show ac current FieldSense technology detects an electrical field. This field interacts with a reference signal created by the T6 tester creating a voltage value on the tester’s display.

• Measure voltage up to 1000 V ac through the open fork without test lead contact to live voltage without opening covers or removing wire nuts

Do not hold or touch wire you are testing during a measurement. Use the black probe to make the ground connection if:
• wearing gloves or insulated footwear
• standing on an insulated ladder
• additional ground contact is required for the application