Microchip Voltage Supervisor 3-Pin TO-92, MCP130-450FI/TO
- RS-stocknr.:
- 144-5867
- Fabrikantnummer:
- MCP130-450FI/TO
- Fabrikant:
- Microchip
Subtotaal (1 zak van 1000 eenheden)*
€ 430,00
(excl. BTW)
€ 520,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 28 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per Zak* |
|---|---|---|
| 1000 + | € 0,43 | € 430,00 |
*prijsindicatie
- RS-stocknr.:
- 144-5867
- Fabrikantnummer:
- MCP130-450FI/TO
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Power Fail Detection | No | |
| Output Driver | Active Low, Open Drain | |
| Mounting Type | Through Hole | |
| Package Type | TO-92 | |
| Pin Count | 3 | |
| Dimensions | 4.95 x 4.95 x 3.94mm | |
| Maximum Monitored Voltage | 4.5V | |
| Maximum Operating Supply Voltage | 5.5 V | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Operating Supply Voltage | 1 V | |
| Minimum Operating Temperature | -40 °C | |
| Minimum Monitored Voltage | 4.37V | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Power Fail Detection No | ||
Output Driver Active Low, Open Drain | ||
Mounting Type Through Hole | ||
Package Type TO-92 | ||
Pin Count 3 | ||
Dimensions 4.95 x 4.95 x 3.94mm | ||
Maximum Monitored Voltage 4.5V | ||
Maximum Operating Supply Voltage 5.5 V | ||
Maximum Operating Temperature +85 °C | ||
Minimum Operating Supply Voltage 1 V | ||
Minimum Operating Temperature -40 °C | ||
Minimum Monitored Voltage 4.37V | ||
- Land van herkomst:
- TH
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Features
Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current
Supervisory & Reset Circuits - Microchip
Gerelateerde Links
- Microchip Voltage Supervisor 3-Pin TO-92, MCP130-450FI/TO
- Microchip Voltage Supervisor 3-Pin TO-92, TC32MCZB
- Microchip Voltage Supervisor 3-Pin TO-92, MCP100-450DI/TO
- Microchip Voltage Supervisor 3-Pin TO-92, MCP121-315E/TO
- Microchip Voltage Supervisor 3-Pin TO-92, MCP100-475DI/TO
- Microchip Voltage Supervisor 1V max. 3-Pin TO-92, MCP100-475DI/TO
- Microchip Voltage Supervisor 4.725V max. 3-Pin TO-92, MCP120-450DI/TO
- Microchip Voltage Supervisor 1V max. 3-Pin TO-92, MCP100-475HI/TO