STMicroelectronics 1 Voltage Supervisor 4-Pin 2.63 V SOT-143-4, STM6315RDW13F
- RS-stocknr.:
- 151-535P
- Fabrikantnummer:
- STM6315RDW13F
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 200 eenheden (geleverd op een wiel)*
€ 123,80
(excl. BTW)
€ 149,80
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 5.280 stuk(s) vanaf 15 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 200 - 480 | € 0,619 |
| 500 + | € 0,498 |
*prijsindicatie
- RS-stocknr.:
- 151-535P
- Fabrikantnummer:
- STM6315RDW13F
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Voltage Supervisor | |
| Number of Supervisors | 1 | |
| Manual Reset | Yes | |
| Power Fail Detection | Yes | |
| Output Driver | Open Drain RST Output | |
| Package Type | SOT-143-4 | |
| Pin Count | 4 | |
| Reset Active Time | 1.5ms | |
| Minimum Operating Temperature | -40°C | |
| Reset Threshold Voltage | 2.63V | |
| Maximum Operating Temperature | 125°C | |
| Series | STM6315 | |
| Standards/Approvals | No | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 1V | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Voltage Supervisor | ||
Number of Supervisors 1 | ||
Manual Reset Yes | ||
Power Fail Detection Yes | ||
Output Driver Open Drain RST Output | ||
Package Type SOT-143-4 | ||
Pin Count 4 | ||
Reset Active Time 1.5ms | ||
Minimum Operating Temperature -40°C | ||
Reset Threshold Voltage 2.63V | ||
Maximum Operating Temperature 125°C | ||
Series STM6315 | ||
Standards/Approvals No | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 1V | ||
- Land van herkomst:
- PH
The STMicroelectronics Microprocessor Reset Circuit is a low power supervisory device used to monitor power supplies. It performs a single function such as asserting a reset signal whenever the VCC supply voltage drops below a preset Value and keeping it asserted until VCC has risen above the preset threshold for a minimum period of time. It also provides a manual reset input. The open drain RST output can be pulled up to a voltage higher than VCC, but less than 6V.
Low supply current of 1.5μA
Guaranteed RST assertion down to VCC of 1.0V
Open drain RST output can exceed VCC
Power supply transient immunity
Gerelateerde Links
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Festo Natural Round Plastic Tube x 4mm OD x 2.6mm ID x 1.4mm
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts