RS Better World

SMC Vacuum Generator, 0.7 mm nozzle, -91 kPa 29 L/min, ZK2 series

RS-stocknr.:: 452-799
Fabrikantnummer:: ZK2A07K5RWA-08
Fabrikant:: SMC

SMC Vacuum Generator, 0.7 mm nozzle, -91 kPa 29 L/min, ZK2 series

Bekijk alle Vacuum Generators

Subtotaal (1 eenheid)*

€ 349,61

(excl. BTW)

€ 423,03

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 14 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 349,61

*prijsindicatie

Ons Better World assortiment bevat producten die het u gemakkelijk maken om een groenere productkeuze te maken waarop u kunt vertrouwen.

Lees meer over de RS Better World producten

RS-stocknr.:: 452-799
Fabrikantnummer:: ZK2A07K5RWA-08
Fabrikant:: SMC

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SMC
	Maximum Suction Flow	29L/min
	Product Type	Vacuum Generator
	Maximum Vacuum Pressure	-91kPa
	Nozzle Diameter	0.7mm
	Series	ZK2
	Silencer	Yes
	Minimum Operating Temperature	+5°C
	Maximum Supply Pressure	0.6MPa
	Vacuum Port Size	8 mm
	Maximum Operating Temperature	+50°C
	Standards/Approvals	CE, UKCA, IEC 61131-9
	Better World Product	Yes
	Better World Claim	Saves Energy

	Alles selecteren
	Merk SMC
	Maximum Suction Flow 29L/min
	Product Type Vacuum Generator
	Maximum Vacuum Pressure -91kPa
	Nozzle Diameter 0.7mm
	Series ZK2
	Silencer Yes
	Minimum Operating Temperature +5°C
	Maximum Supply Pressure 0.6MPa
	Vacuum Port Size 8 mm
	Maximum Operating Temperature +50°C
	Standards/Approvals CE, UKCA, IEC 61131-9
	Better World Product Yes
	Better World Claim Saves Energy

Land van herkomst:: JP

SMC ZK2 Series Vacuum Generator, 29L/min Maximum Suction Flow, -91kPa Maximum Vacuum Pressure - ZK2A07K5RWA-08

This vacuum generator provides Compact pneumatic suction for automation and handling tasks in industrial settings. It functions as an air-driven ejector that produces negative pressure to pick up, hold or transfer components within production lines while incorporating noise reduction for quieter operation.

Features & Benefits

• Maximum supply pressure 0.6 MPa for robust pneumatic drive
• Peak suction capability of -91 kPa to handle strong holds
• Maximum suction flow 29 L/min enabling moderate throughput
• Nozzle diameter 0.7mm for focused vacuum generation
• Vacuum port size 8mm for straightforward piping connections
• Operates between 5 °C and 50 °C for typical factory environments

Applications

• Suitable for pick-and-place of electronic components in SMT processes
• Ideal for small-part transfer in mechanical assembly lines
• Used for part hold-down during inspection and test stations
• Can be used for material handling on automated conveyors

How does it perform when integrated into a Compact end-of-arm tool?

Its small nozzle and moderate flow allow concentrated suction at gripping points while the 8mm port simplifies connection to short tubing runs.

What environmental limits should operators observe?

The unit is designed for ambient temperatures from 5 °C to 50 °C and should be installed where conditions remain within this range.

How does the silencing feature impact installation near workstations?

The integrated silencer reduces exhaust noise, permitting closer placement to operators and inspection areas without introducing additional mufflers.

What supply conditions are required for consistent operation?

A regulated compressed Air source up to 0.6 MPa is necessary to maintain the specified suction and flow performance.