FTDI Chip, USB to Serial UART, 1-Channel 3 Mbps, 5V, USB to UART, 1.8 V, 28-Pin SSOP
- RS-stocknr.:
- 275-0036P
- Fabrikantnummer:
- FT232RNL-REEL
- Fabrikant:
- FTDI Chip
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 10 eenheden (geleverd op een doorlopende strip)*
€ 42,70
(excl. BTW)
€ 51,70
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending 3.566 stuk(s) vanaf 02 december 2026
- Plus verzending 4.000 stuk(s) vanaf 08 december 2026
- Plus verzending 3.800 stuk(s) vanaf 30 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 49 | € 4,27 |
| 50 - 99 | € 4,13 |
| 100 - 1999 | € 3,89 |
| 2000 + | € 2,64 |
*prijsindicatie
- RS-stocknr.:
- 275-0036P
- Fabrikantnummer:
- FT232RNL-REEL
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Product Type | USB to Serial UART | |
| Maximum Data Rate | 3Mbps | |
| Number of Transceivers | 1 | |
| USB Specification | USB 2.0 | |
| Sub Type | USB Controller | |
| Power Supply Type | Single | |
| Maximum Supply Voltage | 5V | |
| Minimum Supply Voltage | 1.8V | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Supported Protocols | USB to UART | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Series | FT232RNL | |
| Automotive Standard | No | |
| Supply Current | 7mA | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Product Type USB to Serial UART | ||
Maximum Data Rate 3Mbps | ||
Number of Transceivers 1 | ||
USB Specification USB 2.0 | ||
Sub Type USB Controller | ||
Power Supply Type Single | ||
Maximum Supply Voltage 5V | ||
Minimum Supply Voltage 1.8V | ||
Package Type SSOP | ||
Pin Count 28 | ||
Supported Protocols USB to UART | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Series FT232RNL | ||
Automotive Standard No | ||
Supply Current 7mA | ||
The FTDI Chip USB UART IC is a USB to serial UART interface device which simplifies USB to serial designs and reduces external component count by fully integrating an external EEPROM, USB termination resistors and an integrated clock circuit which requires no external crystal, into the device. It has been designed to operate efficiently with a USB host controller by using as little as possible of the total USB bandwidth available.
AVCC filtering
RoHS compliant
POR and LDO regulator
Supports synchronous bit bang mode
New FTDI Chip ID security dongle feature
Signal inversion and drive strength selection
Gerelateerde Links
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Festo Natural Round Plastic Tube x 4mm OD x 2.6mm ID x 1.4mm
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts