Infineon CY7C65630-56LTXC, Controller IC 480 Mbps, 3.45 V, USB, 3.15 V, 56-Pin VQFN
- RS-stocknr.:
- 273-2655
- Fabrikantnummer:
- CY7C65630-56LTXC
- Fabrikant:
- Infineon
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 273-2655
- Fabrikantnummer:
- CY7C65630-56LTXC
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Maximum Data Rate | 480Mbps | |
| Product Type | Controller IC | |
| Sub Type | USB Controller | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.45V | |
| Minimum Supply Voltage | 3.15V | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Pin Count | 56 | |
| Minimum Operating Temperature | 0°C | |
| Supported Protocols | USB | |
| Maximum Operating Temperature | 70°C | |
| Series | CY7C65630 | |
| Width | 8 mm | |
| Standards/Approvals | USB 2.0 specification, USB-IF: TID 30000009 | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Maximum Data Rate 480Mbps | ||
Product Type Controller IC | ||
Sub Type USB Controller | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.45V | ||
Minimum Supply Voltage 3.15V | ||
Mount Type Surface | ||
Package Type VQFN | ||
Pin Count 56 | ||
Minimum Operating Temperature 0°C | ||
Supported Protocols USB | ||
Maximum Operating Temperature 70°C | ||
Series CY7C65630 | ||
Width 8 mm | ||
Standards/Approvals USB 2.0 specification, USB-IF: TID 30000009 | ||
Automotive Standard No | ||
The Infineon USB 2.0 hub controllers is an ultra low power single chip USB 2.0 hub controller with integrated upstream and downstream transceivers. USB 2.0 Hubs are high performance, low system cost solutions for USB. The Hubs integrate 1.5 kilo ohm upstream pull up resistors for full speed operation and all downstream 15 kilo ohm pull down resistors. This results in optimization of system costs by providing built in support for the USB 2.0 specification.
Bus power configurations
Space saving 56 pin QFN
In system EEPROM programming
Integrated port status indicator control
Up to four downstream ports supported
Gerelateerde Links
- Infineon CY7C65630-56LTXCT, USB Controller, USB 2.0, 3.15 to 3.45 V, 56-Pin QFN
- Infineon CY7C65630-56LTXI, USB Controller, USB 2.0, 3.15 to 3.45 V, 56-Pin QFN
- Infineon CY7C65620-56LTXC, USB Controller, USB 2.0, 3.15 to 3.45 V, 56-Pin QFN
- Infineon CY7C65631-56LTXC, USB Controller, USB 2.0, 3.45 V, 56-Pin QFN
- Infineon CY7C65620-56LTXI, USB Controller, USB 2.0, 3.15 to 3.45 V, 56-Pin QFN
- Infineon CY7C65631-56LTXI, USB Controller, USB 2.0, 3.15 to 3.45 V, 56-Pin QFN
- Infineon CY7C64215-56LTXC, USB Controller, 12Mbps, USB 2.0, 5.25 V, 56-Pin QFN
- Infineon CY7C65621-56LTXI, USB Controller, USB 2.0, 3.45 V, 56-Pin QFN
