FTDI Chip, Transceiver IC, 28-Channel 1 Mbps, 5.25 V, USB 2.0, 3.3 V, 28-Pin SSOP-28
- RS-stocknr.:
- 257-5457P
- Fabrikantnummer:
- FT245RNL-TUBE
- Fabrikant:
- FTDI Chip
Bulkkorting beschikbaar
Subtotaal 10 eenheden (geleverd in een buis)*
€ 42,20
(excl. BTW)
€ 51,10
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 1.173 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 49 | € 4,22 |
| 50 - 99 | € 4,01 |
| 100 - 249 | € 3,84 |
| 250 + | € 3,45 |
*prijsindicatie
- RS-stocknr.:
- 257-5457P
- Fabrikantnummer:
- FT245RNL-TUBE
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Number of Transceivers | 28 | |
| Product Type | Transceiver IC | |
| Maximum Data Rate | 1Mbps | |
| Sub Type | USB to parallel FIFO Interface | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | No | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 5.25V | |
| Mount Type | Surface | |
| Package Type | SSOP-28 | |
| Pin Count | 28 | |
| Supported Protocols | USB 2.0 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Length | 10.2mm | |
| Series | FT245RNL-TUBE | |
| Height | 1.75mm | |
| Width | 5.3 mm | |
| Supply Current | 15mA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Number of Transceivers 28 | ||
Product Type Transceiver IC | ||
Maximum Data Rate 1Mbps | ||
Sub Type USB to parallel FIFO Interface | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection No | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 5.25V | ||
Mount Type Surface | ||
Package Type SSOP-28 | ||
Pin Count 28 | ||
Supported Protocols USB 2.0 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Length 10.2mm | ||
Series FT245RNL-TUBE | ||
Height 1.75mm | ||
Width 5.3 mm | ||
Supply Current 15mA | ||
Automotive Standard No | ||
- Land van herkomst:
- CN
The FTDI Chip has FT245RNL which is a USB to parallel FIFO interface, with the new FTDIChip-ID security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available.
Entire USB protocol handled on the chip – No USB-specific firmware programming required
Simple interface to MCU / PLD / FPGA logic with simple 4-wire handshake interface
Gerelateerde Links
- FTDI Chip FT245RNL-TUBE, USB Transceiver, 28-Channel, 1Mbps, USB 2.0
- FTDI Chip FT245RNQ-TRAY, USB Transceiver, 28-Channel, 1Mbps, USB 2.0
- FTDI Chip FT245RL-TUBE, USB Controller, 1Mbps, USB 2.0, 1.8 to 5.25 V, 28-Pin SSOP
- FTDI Chip FT260S-U, USB Controller, USB 2.0, 5.5 V, 28-Pin TSSOP
- FTDI Chip FT232RNL-TUBE, USB to Serial UART, 28-Channel, 3.14Mbps, USB 2.0
- FTDI Chip FT232RNQ-TRAY, USB to Serial UART, 28-Channel, 3.14Mbps, USB 2.0
- FTDI Chip FT120T-R, USB Controller, USB 1.1, USB 2.0, 3.3 to 5 V, 28-Pin TSSOP
- FTDI Chip FT231XS-U, USB Controller, USB 2.0, 5.5 V, 20-Pin 20