FTDI Chip FT4233HPQ-TRAY, USB Controller, 4-Channel, 12Mbps, USB 2.0, 3.3 V, 76-Pin QFN-76

Bulkkorting beschikbaar

Subtotaal 10 eenheden (geleverd op een tray)*

€ 67,60

(excl. BTW)

€ 81,80

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 512 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
10 - 99€ 6,76
100 +€ 6,60

*prijsindicatie

Packaging Options:
RS-stocknr.:
228-3130P
Fabrikantnummer:
FT4233HPQ-TRAY
Fabrikant:
FTDI Chip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

FTDI Chip

Number of Transceivers

4

Data Rate

12Mbps

IC Type

Controller IC

Protocols Supported

USB 2.0

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

3.3 V

Package Type

QFN-76

Pin Count

76

The FTDI Chip FT4233HP/FT4232HP is a Hi-Speed USB device with a Type-C/PD3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels compatible with the existing FT4232H – Quad Hi-speed USB to multipurpose UART/MPSSE solution.

Supports PD Specification 3.0
2 x USB PD 3.0 Port Support. Port 1 supports Dual Role Swap Function while Port 2 supports sink mode with charging function through to Port 1
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source
Type-C/PD Physical Layer Protocol
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM
PD mode configuration through external EEPROM
Options to use external MCU controlling PD policy through I2C interface
Up to 8 Configurable PD GPIO pins support
External MCU support through I2C bus
External EEPROM support for USB device configuration and PD profile

Gerelateerde Links