FTDI Chip, Controller IC, 2-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 68-Pin QFN
- RS-stocknr.:
- 228-3118
- Fabrikantnummer:
- FT2232HPQ-TRAY
- Fabrikant:
- FTDI Chip
Subtotaal (1 tray van 260 eenheden)*
€ 1.379,04
(excl. BTW)
€ 1.668,68
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 520 stuk(s) vanaf 19 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per tray* |
|---|---|---|
| 260 + | € 5,304 | € 1.379,04 |
*prijsindicatie
- RS-stocknr.:
- 228-3118
- Fabrikantnummer:
- FT2232HPQ-TRAY
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Number of Transceivers | 2 | |
| Maximum Data Rate | 12Mbps | |
| Product Type | Controller IC | |
| USB Specification | USB Type C | |
| Sub Type | Controller | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 1.32V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 68 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Length | 8mm | |
| Standards/Approvals | RoHS | |
| Width | 8 mm | |
| Series | FT2232HP | |
| Height | 0.9mm | |
| Automotive Standard | No | |
| Supply Current | 0.83mA | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Number of Transceivers 2 | ||
Maximum Data Rate 12Mbps | ||
Product Type Controller IC | ||
USB Specification USB Type C | ||
Sub Type Controller | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 1.32V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 68 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Length 8mm | ||
Standards/Approvals RoHS | ||
Width 8 mm | ||
Series FT2232HP | ||
Height 0.9mm | ||
Automotive Standard No | ||
Supply Current 0.83mA | ||
The FTDI Chip FT2233HP/FT2232HP is a Hi-Speed USB device with a Type-C/PD 3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 2 independent channels compatible with the FT2232H – Dual Hi-speed USB to multipurpose UART/MPSSE solution.
Supports PD Specification 3.0.
1 x USB PD 3.0 Port supports Dual Role Swap Function
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.
Type-C/PD Physical Layer Protocol.
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.
PD mode configuration through external EEPROM.
Options to use external MCU controlling PD policy through I2C interface.
Up to 8 Configurable PD GPIO pins support.
External MCU support through I2C bus
Gerelateerde Links
- FTDI Chip FT2232HPQ-TRAY, USB Controller, 2-Channel, 12Mbps, USB 2.0, 3.3 V, 68-Pin QFN 68
- FTDI Chip FT4232HPQ-TRAY, USB Controller, 4-Channel, 12Mbps, USB 2.0, 3.3 V, 68-Pin QFN-68
- FTDI Chip FT2232HQ-TRAY, USB Controller, 12Mbps, 3.3 V, 64-Pin QFN
- FTDI Chip FT4232HQ-TRAY, USB Controller, 12Mbps, 3.3 V, 64-Pin QFN
- FTDI Chip FT233HPQ-TRAY, USB Controller, 12Mbps, USB 2.0, 3.3 V, 64-Pin QFN 64
- FTDI Chip FT232HPQ-TRAY, USB Controller, 12Mbps, USB 2.0, 3.3 V, 56-Pin QFN 56
- FTDI Chip FT232HQ-TRAY, USB Controller, 12Mbps, 1.8 V, 48-Pin QFN
- FTDI Chip FT4233HPQ-TRAY, USB Controller, 4-Channel, 12Mbps, USB 2.0, 3.3 V, 76-Pin QFN-76