FTDI Chip VNC2-32L1C-REEL, USB Controller, 12Mbps, USB, 3.3 V, 32-Pin LQFP

Bekijk alle USB Interface ICs
Bulkkorting beschikbaar

Subtotaal (1 verpakking van 2 eenheden)*

€ 9,37

(excl. BTW)

€ 11,338

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Beperkte voorraad
  • 22 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 38 stuk(s) vanaf 23 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
2 - 48€ 4,685€ 9,37
50 - 98€ 4,21€ 8,42
100 - 248€ 4,09€ 8,18
250 - 498€ 3,985€ 7,97
500 +€ 3,895€ 7,79

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
196-6439
Fabrikantnummer:
VNC2-32L1C-REEL
Fabrikant:
FTDI Chip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

FTDI Chip

Number of Transceivers

1

Data Rate

12Mbps

Protocols Supported

USB

IC Type

Controller IC

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

3.3 V

Mounting Type

Surface Mount

Package Type

LQFP

Pin Count

32

Dimensions

7 x 7 x 1.45mm

Height

1.45mm

Length

7mm

Maximum Operating Temperature

+85 °C

Width

7mm

Minimum Operating Temperature

-40 °C

Dual USB 2.0 Host / Slave controller.
Embedded 16-bit Harvard architecture MCU core, with 256KBytes of Flash memory and 16Kbytes RAM.
2 x Full-Speed / Low-speed USB 2.0 ports supporting Host or Slave operation.
Programmable UART interface, supports up to 6MBaud transfers.
8-bit wide FIFO interface.
2 x SPI slave interfaces, 1 x SPI master interface.
PWM (Pulse Width Modulation) interface.
4 channel DMA controller, and general purpose timers.
Support for reduced power modes.
Two packages size options (32-/48-pin QFN and LQFP packages).
Backwards compatible with VNC1L with 48-pin LQFP package.
Extended temperature support (-40°C to +85°C).
Enhanced features with Vinculum Software Tool Suite
Based on royalty-free flexible ’C’ based Integrated Development Environment.
Includes compiler, drivers and RTOS kernel to support user firmware development.
Debug interface for real-time hardware based code debug.
Pre-compiled libraries for several USB classes including FAT file system support.

Gerelateerde Links