Infineon, Controller IC, 4-Channel, 5 V, USB 2.0, 5 V, 48-Pin TQFP

Bekijk alle USB Interface ICs

Subtotaal (1 rol van 1500 eenheden)*

€ 2.763,00

(excl. BTW)

€ 3.343,50

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 1.500 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per rol*
1500 +€ 1,842€ 2.763,00

*prijsindicatie

RS-stocknr.:
181-7455
Fabrikantnummer:
CY7C65632-48AXCT
Fabrikant:
Infineon
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Infineon

Number of Transceivers

4

Product Type

Controller IC

USB Specification

USB 2.0

Sub Type

Controller

Power Supply Type

Single

ESD Protection

Yes

Maximum Supply Voltage

5V

Minimum Supply Voltage

5V

Mount Type

Surface

Package Type

TQFP

Pin Count

48

Supported Protocols

USB 2.0

Minimum Operating Temperature

0°C

Maximum Operating Temperature

70°C

Standards/Approvals

No

Height

1.4mm

Series

CY7C65632

Length

7mm

Width

7 mm

Automotive Standard

No

Supply Current

105.4mA

High performance, low-power USB 2.0 Hub, optimized for low cost designs with minimum Bill-of-material

USB 2.0 hub controller

Compliant with USB 2.0 specification, TID# 30000060

Up to four downstream ports support

Downstream ports are backward compatible with FS, LS

Single transaction translator (TT) for low cost

Very low power consumption

Supports bus-powered and self-powered modes

Auto switching between bus-powered and self-powered

Single MCU with 2K ROM and 64 byte RAM

Lowest power consumption

Highly integrated solution for reduced BOM cost

Internal regulator single power supply 5 V required

Provision of connecting 3.3 V with external regulator

Integrated upstream pull-up resistor

Integrated pull-down resistors for all downstream ports

Integrated upstream/downstream termination resistors

Integrated port status indicator control

12 MHz +/500 ppm external crystal with drive level 600 μW (integrated PLL) clock input with optional 27/48 MHz oscillator clock input

Internal power failure detection for ESD recovery

Downstream port management

Support individual and ganged mode power management

Overcurrent detection

Two port status indicators per downstream port

Maximum configurability

VID and PID are configurable through external EEPROM

Number of ports, removable/non-removable ports are configurable through EEPROM and I/O pin configuration

I/O pins can configure gang/individual mode power switching, reference clock source and polarity of power switch enable pin

Configuration options also available through mask ROM Available in space saving 48-pin (7 x 7 mm) TQFP and 28-pin 5 x 5 mm) QFN packages Supports 0 °C to 70 °C temperature range

Gerelateerde Links