FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6V, USB 3.0, USB 2.0, 3.3 V, 76-Pin QFN
- RS-stocknr.:
- 146-6840P
- Fabrikantnummer:
- FT601Q-B-T
- Fabrikant:
- FTDI Chip
Subtotaal 1 eenheid (geleverd op een tray)*
€ 8,53
(excl. BTW)
€ 10,32
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 5.630 stuk(s) vanaf 11 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 8,53 |
*prijsindicatie
- RS-stocknr.:
- 146-6840P
- Fabrikantnummer:
- FT601Q-B-T
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Maximum Data Rate | 5Gbps | |
| Product Type | USB Bridge IC | |
| Number of Transceivers | 2 | |
| USB Specification | USB 2.0, USB 3.0 | |
| Sub Type | Transceiver | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 76 | |
| Supported Protocols | USB 3.0, USB 2.0 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Length | 9.1mm | |
| Height | 0.95mm | |
| Series | FT601Q | |
| Automotive Standard | No | |
| Supply Current | 70mA | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Maximum Data Rate 5Gbps | ||
Product Type USB Bridge IC | ||
Number of Transceivers 2 | ||
USB Specification USB 2.0, USB 3.0 | ||
Sub Type Transceiver | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 76 | ||
Supported Protocols USB 3.0, USB 2.0 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Length 9.1mm | ||
Height 0.95mm | ||
Series FT601Q | ||
Automotive Standard No | ||
Supply Current 70mA | ||
Enabling Faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.