FTDI Chip FT600Q-B-T, USB Bridge IC, 2-Channel, 480 Mbps, 5Gbit/s, USB 2.0, USB 3.0, 3.3 V, 56-Pin QFN
- RS-stocknr.:
- 146-6838P
- Fabrikantnummer:
- FT600Q-B-T
- Fabrikant:
- FTDI Chip
Bulkkorting beschikbaar
Subtotaal 10 eenheden (geleverd op een tray)*
€ 62,10
(excl. BTW)
€ 75,10
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 617 stuk(s) vanaf 15 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 24 | € 6,21 |
| 25 - 49 | € 6,04 |
| 50 - 99 | € 5,88 |
| 100 + | € 5,74 |
*prijsindicatie
- RS-stocknr.:
- 146-6838P
- Fabrikantnummer:
- FT600Q-B-T
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Number of Transceivers | 2 | |
| Data Rate | 480 Mbps, 5Gbit/s | |
| IC Type | Transceiver IC | |
| Protocols Supported | USB 2.0, USB 3.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Typical Single Supply Voltage | 3.3 V | |
| Mounting Type | Surface Mount | |
| Package Type | QFN | |
| Pin Count | 56 | |
| Dimensions | 7.1 x 7.1 x 0.69mm | |
| Height | 0.69mm | |
| Length | 7.1mm | |
| Maximum Operating Temperature | +85 °C | |
| Width | 7.1mm | |
| Minimum Operating Temperature | -40 °C | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Number of Transceivers 2 | ||
Data Rate 480 Mbps, 5Gbit/s | ||
IC Type Transceiver IC | ||
Protocols Supported USB 2.0, USB 3.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Typical Single Supply Voltage 3.3 V | ||
Mounting Type Surface Mount | ||
Package Type QFN | ||
Pin Count 56 | ||
Dimensions 7.1 x 7.1 x 0.69mm | ||
Height 0.69mm | ||
Length 7.1mm | ||
Maximum Operating Temperature +85 °C | ||
Width 7.1mm | ||
Minimum Operating Temperature -40 °C | ||
Enabling faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.