Microchip USB2514BT-I/M2, USB Controller 480 Mbps, 3.3 V, USB 2.0, 1.2 V, 36-Pin
- RS-stocknr.:
- 333-131
- Fabrikantnummer:
- USB2514BT-I/M2
- Fabrikant:
- Microchip
Subtotaal (1 rol van 3000 eenheden)*
€ 9.741,00
(excl. BTW)
€ 11.787,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 24 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 3000 + | € 3,247 | € 9.741,00 |
*prijsindicatie
- RS-stocknr.:
- 333-131
- Fabrikantnummer:
- USB2514BT-I/M2
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Maximum Data Rate | 480Mbps | |
| Product Type | USB Controller | |
| USB Specification | USB 2.0 | |
| Sub Type | USB Controller | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Supply Voltage | 1.2V | |
| Pin Count | 36 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Height | 0.88mm | |
| Standards/Approvals | USB Battery Charging specification Rev. 1.1, USB 2.0 Specification (1) | |
| Series | USB251xB/xBi | |
| Width | 6 mm | |
| Length | 6mm | |
| Supply Current | 70mA | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Maximum Data Rate 480Mbps | ||
Product Type USB Controller | ||
USB Specification USB 2.0 | ||
Sub Type USB Controller | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.3V | ||
Minimum Supply Voltage 1.2V | ||
Pin Count 36 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Height 0.88mm | ||
Standards/Approvals USB Battery Charging specification Rev. 1.1, USB 2.0 Specification (1) | ||
Series USB251xB/xBi | ||
Width 6 mm | ||
Length 6mm | ||
Supply Current 70mA | ||
The Microchip 4 Port USB 2.0 Hi Speed Hub Controller is a family of low power, configurable, MTT hub controller IC products for embedded USB solutions. The x in the part number indicates the number of downstream ports available, while the B indicates battery charging support. The Microchip hub supports low speed, full speed, and hi speed downstream devices on all of the enabled downstream ports.
Fully integrated USB termination and pull up/pull down resistors
Onboard 24 MHz crystal driver or external 24 MHz clock input
4 kilovolts of HBM JESD22-A114F ESD protection
Supports self or bus powered operation
Gerelateerde Links
- Microchip USB2514B-I/M2, USB Controller, 4-Channel, USB 2.0, 3.3 V, 36-Pin SQFN
- Microchip USB2513B-I/M2, USB Controller, 3-Channel, USB 2.0, 3.3 V, 36-Pin SQFN
- Microchip USB2422T-I/MJ, USB Controller, USB 2.0, 1.2 V, 24-Pin SQFN
- Microchip USB2512B/M2, USB Controller, I2C, USB 2.0, 3.3 V, 36-Pin SQFN
- Microchip USB2512B-I/M2, USB Controller, 2-Channel, USB 2.0, 3 to 3.6 V, 36-Pin SQFN
- Microchip USB2514B/M2, USB Controller, 4-Channel, USB 2.0, 3.3 V, 36-Pin SQFN
- Microchip USB3503-I/ML, USB Controller, 1Mbps, USB 2.0, 1.2 V, 3.3 V, 32-Pin SQFN
- Microchip USB2512B-I/M2, USB Bridge IC, 2-Channel, USB 2.0, 3 to 3.6 V, 36-Pin SQFN