StarTech.com USB 3.0, Male USB Type A to Male USB B, Black, 2 m

This IC socket USB cable provides a male-to-male connection for data and power between compatible devices in USB 3.0 environments. It links a standard USB Type A plug to a USB 3.2 Type B (9‑pin) male connector, offering backward‑compatible operation where higher throughput is required. The cable is finished in a black polyvinyl chloride jacket and is intended for use in typical commercial and laboratory settings where robust, CE‑approved interconnects are needed.

• Supports up to 5 Gbps transfer rates for high‑speed data
• USB Type A to 9‑pin Type B interface for peripheral compatibility
• Male‑to‑male configuration for direct device‑to‑device linking
• PVC outer sheath provides abrasion resistance and flexibility
• CE certification indicating conformity with applicable standards
• 2m length for extended reach without signal repeaters

• Used with printers and peripherals requiring Type B ports
• Suitable for connecting data acquisition modules to hosts
• Ideal for test benches needing direct male‑to‑male cabling
• Can be used for high‑speed file transfers between devices
• Used for temporary setups in workshops and service centres

The cable utilises a PVC jacket for external insulation

Yes, the connection is backward compatible so it will negotiate lower USB versions automatically when paired with older equipment.

No, it does not carry hazardous‑area certification and should not be used where such approvals are mandatory.

The USB Type A and the 9‑pin Type B male connectors follow standard USB mating geometry, ensuring correct physical alignment and secure mechanical engagement.