Infineon ESD150B1W0201E6327XTSA1 Bi-Directional ESD Protection Diode, 12 W, 2-Pin WLL-2

RS-stocknr.:: 258-0815
Fabrikantnummer:: ESD150B1W0201E6327XTSA1
Fabrikant:: Infineon

Infineon ESD150B1W0201E6327XTSA1 Bi-Directional ESD Protection Diode, 12 W, 2-Pin WLL-2

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 verpakking van 20 eenheden)*

€ 2,24

(excl. BTW)

€ 2,72

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

Plus verzending 8.160 stuk(s) vanaf 02 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
20 - 180	€ 0,112	€ 2,24
200 - 480	€ 0,106	€ 2,12
500 - 980	€ 0,061	€ 1,22
1000 - 1980	€ 0,056	€ 1,12
2000 +	€ 0,051	€ 1,02

*prijsindicatie

RS-stocknr.:: 258-0815
Fabrikantnummer:: ESD150B1W0201E6327XTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Diode Configuration	Single Bi-Directional
	Direction Type	Bi-Directional
	Product Type	ESD Protection Diode
	Minimum Breakdown Voltage Vbr	5.9V
	Mount Type	PCB
	Package Type	WLL-2
	Maximum Reverse Stand-off Voltage Vwm	3.3V
	Pin Count	2
	Peak Pulse Power Dissipation Pppm	12W
	Minimum Operating Temperature	-55°C
	ESD Protection	Yes
	Maximum Peak Pulse Current Ippm	3A
	Test Current It	1mA
	Clamping Voltage VC	5.4V
	Maximum Operating Temperature	125°C
	Standards/Approvals	IEC61000-4-4, IEC61000-4-5, IEC61000-4-2
	Series	ESD150-B1-W0201
	Maximum Reverse Leakage Current	10nA
	Automotive Standard	No

	Alles selecteren
	Merk Infineon
	Diode Configuration Single Bi-Directional
	Direction Type Bi-Directional
	Product Type ESD Protection Diode
	Minimum Breakdown Voltage Vbr 5.9V
	Mount Type PCB
	Package Type WLL-2
	Maximum Reverse Stand-off Voltage Vwm 3.3V
	Pin Count 2
	Peak Pulse Power Dissipation Pppm 12W
	Minimum Operating Temperature -55°C
	ESD Protection Yes
	Maximum Peak Pulse Current Ippm 3A
	Test Current It 1mA
	Clamping Voltage VC 5.4V
	Maximum Operating Temperature 125°C
	Standards/Approvals IEC61000-4-4, IEC61000-4-5, IEC61000-4-2
	Series ESD150-B1-W0201
	Maximum Reverse Leakage Current 10nA
	Automotive Standard No

Datasheet - ESD150B1W0201E6327XTSA1

Infineon ESD150-B1-W0201 Series ESD Protection Diode, 3.3V Maximum Reverse Stand-Off Voltage, 5.4V Clamping Voltage - ESD150B1W0201E6327XTSA1

This ESD protection diode is a bidirectional transient voltage suppression device designed for PCB mounting to protect sensitive circuitry from electrostatic discharge and surge events. It operates across a wide ambient range and is intended for applications where controlled clamping and low leakage are required. The component meets multiple IEC immunity standards and is supplied in an SMT WLL-2 package for Compact board-level protection.

Features and Benefits:

• 3.3V Maximum Reverse Stand-off Voltage provides defined standoff protection
• 5.4V Clamping Voltage limits transient peaks to protect downstream components
• 3A Peak Pulse Current handles short surge events without failure
• 12W Peak Pulse Power Dissipation absorbs high-energy pulses during tests
• 10nA Maximum Reverse Leakage Current minimises quiescent drain on lines

Applications

• Suitable for protecting I/O lines against ESD events on PCBs
• Ideal for safeguarding interfaces in communications equipment
• Used with sensitive sensors needing low-leakage protection
• Can be used for transient suppression on power-distribution lines
• Suitable for designs requiring IEC 61000-4-2 compliance verification

What directional behaviour does the device provide?

It functions as a bi-directional clamping diode allowing symmetrical protection for signals that can swing positive or negative.

What are the permitted operating temperature limits?

The component is rated to operate down to -55°C and up to 125°C.

How is Pulse performance specified for surge events?

Peak Pulse power absorption is 12W with a Peak Pulse current capability of 3A under specified test conditions.

Which standards were used to validate its immunity performance?

It has been assessed against IEC 61000-4-4, IEC 61000-4-5 and IEC 61000-4-2.