Wera Adjustable Hexagon Torque Screwdriver, 0.1 To 0.34 Nm, 4 mm Drive ESD Safe, ±6 % Accuracy
- RS-stocknr.:
- 123-1845
- Fabrikantnummer:
- 05074826001
- Fabrikant:
- Wera
Subtotaal (1 eenheid)*
€ 162,30
(excl. BTW)
€ 196,38
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 15 stuk(s) klaar voor verzending
- 3 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 4 stuk(s) vanaf 09 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 162,30 |
*prijsindicatie
- RS-stocknr.:
- 123-1845
- Fabrikantnummer:
- 05074826001
- Fabrikant:
- Wera
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Wera | |
| Torque Range | 0.1 To 0.34 Nm | |
| Product Type | Torque Screwdriver | |
| Tip Type | Hexagon | |
| Sub Type | Adjustable | |
| Drive Size | 4 mm | |
| ESD Safe | Yes | |
| Overall Length | 138mm | |
| Accuracy | ±6 % | |
| Grip Style | Multi-Component Kraftform Plus Handle | |
| Standards/Approvals | DIN ISO 1173-C 6.3 and E 6.3 | |
| Alles selecteren | ||
|---|---|---|
Merk Wera | ||
Torque Range 0.1 To 0.34 Nm | ||
Product Type Torque Screwdriver | ||
Tip Type Hexagon | ||
Sub Type Adjustable | ||
Drive Size 4 mm | ||
ESD Safe Yes | ||
Overall Length 138mm | ||
Accuracy ±6 % | ||
Grip Style Multi-Component Kraftform Plus Handle | ||
Standards/Approvals DIN ISO 1173-C 6.3 and E 6.3 | ||
Vrijgesteld
- Land van herkomst:
- CZ
Serie 7400 ESD Kraftform pre-set adjustable torque screwdrivers (0.1-1.0 Nm) with quick-release chuck
Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. With quick-release chuck for rapid bit change. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21).
Please note: 1 Ncm = 0.01 Nm.
Factory pre-set, adjustable Kraftform ESD torque screwdriver
ESD-safe tool thanks to surface resistance of ≤ 10^9 Ohm
Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive
Distinct audible and perceivable excess load signal when the pre-set torque value is reached
Kraftform handle for fast and ergonomic screwdriving
Serie 7400 ESD Kraftform pre-set adjustable torque screwdrivers (0.1-1.0 Nm) with quick-release chuck, 7455 ESD x 0.1 Nm x 0.1-0.34 Nm
Gerelateerde Links
- Wera Adjustable Torque Screwdriver, 0.1 To 0.34 Nm, 4 mm Drive ESD Safe, ±6 % Accuracy
- Wera Adjustable Torque Screwdriver, 0.1 To 0.34 Nm, 1/4 in Drive ESD Safe, ±6 % Accuracy
- Wera Pre-Settable Torque Screwdriver, 0.3 Nm, 1/4 in Drive ESD Safe, ±6 % Accuracy
- Wera Pre-Settable Torque Screwdriver, 0.9 Nm, 1/4 in Drive ESD Safe, ±6 % Accuracy
- Wera Pre-Settable Torque Screwdriver, 0.1 Nm, 1/4 in Drive ESD Safe, ±6 % Accuracy
- Wera Pre-Settable Torque Screwdriver, 1.2 Nm, 1/4 in Drive ESD Safe, ±6 % Accuracy
- Wera Torque Screwdriver, 0.02 To 0.11 Nm, 4 mm Drive ESD Safe, ±10 % Accuracy
- Bahco Hexagon Torque Screwdriver, 90 To 450 Ncm, 1/4 in Drive ESD Safe, ±6 % Accuracy