Fabrikantnummer

RS PRO 115 V ac, 230 V ac, 2 x 18V ac Toroidal Transformer, 80VA 2 Output

RS-stocknr.:: 173-0131
Fabrikant:: RS PRO

RS PRO 115 V ac, 230 V ac, 2 x 18V ac Toroidal Transformer, 80VA 2 Output

Subtotaal (1 doos van 16 eenheden)*

€ 536,048

(excl. BTW)

€ 648,624

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Op voorraad

Plus verzending 64 stuk(s) vanaf 10 december 2025

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Doos*
16 +	€ 33,503	€ 536,05

*prijsindicatie

RS-stocknr.:: 173-0131
Fabrikant:: RS PRO

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	RS PRO
	Primary Voltage Rating	115 V ac, 230 V ac
	Secondary Voltage Rating	2 x 18V ac
	Power Rating	80VA
	Number of Outputs	2
	Secondary Current	2.222A
	Height	38mm
	Weight	1kg
	Diameter	93mm
	Dimensions	93 (Dia.) x 38mm
	Minimum Operating Frequency	50Hz
	Maximum Operating Frequency	60Hz
	Termination Type	Copper Conductor

	Alles selecteren
	Merk RS PRO
	Primary Voltage Rating 115 V ac, 230 V ac
	Secondary Voltage Rating 2 x 18V ac
	Power Rating 80VA
	Number of Outputs 2
	Secondary Current 2.222A
	Height 38mm
	Weight 1kg
	Diameter 93mm
	Dimensions 93 (Dia.) x 38mm
	Minimum Operating Frequency 50Hz
	Maximum Operating Frequency 60Hz
	Termination Type Copper Conductor

Toroid open wound dual 115V primary

High quality open style toroidal transformers with dual 115Vac 50/60Hz primary windings and twin secondary windings which may be connected in series or parallel or used independently.

Features & Benefits

• Small size and low weight compared with traditional stacked lamination types

• Extremely low level of radiated magnetic field

• Very low induced noise (hum)

• Very low iron loss

• Double insulated primary leads

Note

Mounting hardware is not supplied, available seperately

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.