Fabrikantnummer

RS PRO 115 V ac, 230 V ac, 2 x 9V ac Toroidal Transformer, 15VA 2 Output

RS-stocknr.:: 173-0085
Fabrikant:: RS PRO

RS PRO 115 V ac, 230 V ac, 2 x 9V ac Toroidal Transformer, 15VA 2 Output

Subtotaal (1 doos van 40 eenheden)*

€ 708,44

(excl. BTW)

€ 857,20

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Tijdelijk niet op voorraad

Verzending vanaf 30 juni 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Doos*
40 +	€ 17,711	€ 708,44

*prijsindicatie

RS-stocknr.:: 173-0085
Fabrikant:: RS PRO

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	RS PRO
	Primary Voltage Rating	115 V ac, 230 V ac
	Secondary Voltage Rating	2 x 9V ac
	Power Rating	15VA
	Number of Outputs	2
	Secondary Current	833mA
	Height	31mm
	Weight	365g
	Diameter	60mm
	Dimensions	60 (Dia.) x 31mm
	Minimum Operating Frequency	50Hz
	Maximum Operating Frequency	60Hz
	Termination Type	Copper Conductor Termination Wire

	Alles selecteren
	Merk RS PRO
	Primary Voltage Rating 115 V ac, 230 V ac
	Secondary Voltage Rating 2 x 9V ac
	Power Rating 15VA
	Number of Outputs 2
	Secondary Current 833mA
	Height 31mm
	Weight 365g
	Diameter 60mm
	Dimensions 60 (Dia.) x 31mm
	Minimum Operating Frequency 50Hz
	Maximum Operating Frequency 60Hz
	Termination Type Copper Conductor Termination Wire

Toroid open wound dual 115V primary

High quality open style toroidal transformers with dual 115Vac 50/60Hz primary windings and twin secondary windings which may be connected in series or parallel or used independently.

Features & Benefits

• Small size and low weight compared with traditional stacked lamination types

• Extremely low level of radiated magnetic field

• Very low induced noise (hum)

• Very low iron loss

• Double insulated primary leads

Note

Mounting hardware is not supplied, available seperately

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.