Honeywell Toggle Switch, Bushing Mount, On-Off-On, DPDT, Screw Terminal, 277 V ac

RS-stocknr.:: 842-4808
Fabrikantnummer:: 2TL1-7
Fabrikant:: Honeywell

Honeywell Toggle Switch, Bushing Mount, On-Off-On, DPDT, Screw Terminal, 277 V ac

Subtotaal (1 eenheid)*

€ 71,52

(excl. BTW)

€ 86,54

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 71,52

*prijsindicatie

RS-stocknr.:: 842-4808
Fabrikantnummer:: 2TL1-7
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Toggle Switch
	Contact Configuration	DPDT
	Switch Operation	On-Off-On
	Switch Contact Current	11, 18, 6A
	Mount Type	Bushing
	Terminal Type	Screw
	Panel Cutout Size	12.4 mm
	Contact AC Voltage	277V ac
	Minimum Operating Temperature	-65°C
	Actuator Length	17mm
	Maximum Operating Temperature	71°C
	Length	22mm
	Height	26.7mm
	Series	TL
	Width	33.5mm
	Standards/Approvals	UL, CSA, CE

	Alles selecteren
	Merk Honeywell
	Product Type Toggle Switch
	Contact Configuration DPDT
	Switch Operation On-Off-On
	Switch Contact Current 11, 18, 6A
	Mount Type Bushing
	Terminal Type Screw
	Panel Cutout Size 12.4 mm
	Contact AC Voltage 277V ac
	Minimum Operating Temperature -65°C
	Actuator Length 17mm
	Maximum Operating Temperature 71°C
	Length 22mm
	Height 26.7mm
	Series TL
	Width 33.5mm
	Standards/Approvals UL, CSA, CE

Land van herkomst:: US

Honeywell Series TL Toggle Switch, 17mm Actuator Length, DPDT Contact Configuration - 2TL1-7

This toggle switch provides a Compact manual switching solution for electrical control panels and equipment. Designed for through-panel mounting with a bushing interface, it offers a three-position On–Off–On arrangement and is suited to installations requiring changeover capability in industrial and electronic systems.

Features and Benefits:

• DPDT contact arrangement delivers simultaneous dual-circuit control
• Rated for up to 277V AC operation for high-voltage switching
• Screw terminals enable secure, field-serviceable connections
• Wide contact current ratings support varied load profiles
• Operates reliably across a broad temperature range
• Conforms to recognised safety approvals for system integration

Applications

• Suitable for motor direction reversing in control cabinets
• Ideal for utility-panel switching in automation equipment
• Used with power distribution modules requiring dual circuits
• Can be used for manual selection in test rigs and benches
• Suitable for retrofitting on industrial instrument panels

What mounting preparation is required for panel installation?

A circular cut-out of 12.4mm is required to accommodate the bushing mount and ensure correct retention when fitting through the metal panel.

How does the actuator profile affect operator use?

The 17mm actuator length provides a positive tactile lever travel for clear position selection while remaining Compact for crowded control layouts.

What Terminal maintenance is recommended for long-term reliability?

Periodic inspection and torquing of the screw terminals is advised to maintain low-resistance connections, especially where vibration or thermal cycling occurs.

How does the switch handle varying current demands across circuits?

It offers multiple contact current ratings, allowing selection of appropriate circuit usage up to the listed amperages to match differing load requirements.