Honeywell Toggle Switch, Bushing Mount, On-Off-On, DPDT, Screw Terminal, 28 V dc, 125 V ac

RS-stocknr.:: 212-5220
Fabrikantnummer:: 2TL28-1
Fabrikant:: Honeywell

Honeywell Toggle Switch, Bushing Mount, On-Off-On, DPDT, Screw Terminal, 28 V dc, 125 V ac

Subtotaal (1 doos van 20 eenheden)*

€ 3.646,35

(excl. BTW)

€ 4.412,08

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

3 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Dozen	Per Doos	Per stuk*
1 +	€ 3.646,35	€ 182,318

*prijsindicatie

RS-stocknr.:: 212-5220
Fabrikantnummer:: 2TL28-1
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Toggle Switch
	Contact Configuration	DPDT
	Switch Operation	On-Off-On
	Switch Contact Current	20A
	Mount Type	Bushing
	Terminal Type	Screw
	Illuminated	No
	Minimum Operating Temperature	71°C
	Contact DC Voltage	28V dc
	Contact AC Voltage	125V ac
	Actuator Length	26.67mm
	Switch Configuration	On-Off-On
	Maximum Operating Temperature	-65°C
	Series	TL
	Width	33.5mm
	Standards/Approvals	CE, UL, CSA
	Length	30mm
	Height	26.7mm

	Alles selecteren
	Merk Honeywell
	Product Type Toggle Switch
	Contact Configuration DPDT
	Switch Operation On-Off-On
	Switch Contact Current 20A
	Mount Type Bushing
	Terminal Type Screw
	Illuminated No
	Minimum Operating Temperature 71°C
	Contact DC Voltage 28V dc
	Contact AC Voltage 125V ac
	Actuator Length 26.67mm
	Switch Configuration On-Off-On
	Maximum Operating Temperature -65°C
	Series TL
	Width 33.5mm
	Standards/Approvals CE, UL, CSA
	Length 30mm
	Height 26.7mm

Datasheet - 2TL28-1

N.v.t.

Honeywell Series TL Toggle Switch, 20A Current Rating, DPDT Contact Configuration - 2TL28-1

This toggle switch provides a manual mechanism for selecting between three circuit states in industrial control and instrumentation environments. It is a bushing-mounted, non-illuminated switch intended for installations where a compact, robust selector with multiple contact poles is required. The device suits electrical panels and machinery control interfaces where reliable mechanical switching across alternating and direct voltages is necessary.

Features and Benefits:

• DPDT contact arrangement enables two independent circuits to be switched simultaneously
• On-Off-On operation allows centre-off selection for reversible control
• Screw terminals permit secure, serviceable wiring connections
• Rated for 125V AC and 28V DC to accommodate mixed-voltage systems
• 20A contact rating supports heavy-current switching duties
• Approved to CE UL CSA standards for recognised safety conformity

Applications

• Suitable for reversing motor direction in control cabinets
• Ideal for selecting between power sources in distribution panels
• Used for manual mode selection on automation equipment
• Can be used for switching auxiliary circuits in industrial machinery

What type of mounting is required for installation?

It mounts via a bushing and is intended for panel or enclosure front-face fitting using a compatible hole and securing nut.

How does the switch perform in temperature extremes?

It operates across a wide temperature range from -65°C to 71°C, enabling use in cold storage and elevated-ambient industrial spaces.

What actuator reach should be allowed in a panel cut-out?

The actuator projects 26.67mm from the mounting plane, so panel spacing should permit that clearance for reliable operation.

Are the terminals suitable for periodic maintenance?

The screw-type terminals allow repeated disconnection and reconnection with standard tools for servicing or reconfiguration.

How Compact is the device for tight installations?

The body measures 33.5mm in width, 30mm in length and 26.7mm in height, offering a small footprint for dense control layouts.