Honeywell Toggle Switch, Bushing Mount, On-On, DPDT, Wire Terminal, 28 V dc, 125 V ac

RS-stocknr.:: 212-5172
Fabrikantnummer:: 102TL2-3
Fabrikant:: Honeywell

Honeywell Toggle Switch, Bushing Mount, On-On, DPDT, Wire Terminal, 28 V dc, 125 V ac

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 532,34

(excl. BTW)

€ 644,13

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 06 januari 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 532,34
5 - 9	€ 517,43
10 +	€ 503,59

*prijsindicatie

RS-stocknr.:: 212-5172
Fabrikantnummer:: 102TL2-3
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Contact Configuration	DPDT
	Product Type	Toggle Switch
	Switch Operation	On-On
	Switch Contact Current	20A
	Mount Type	Bushing
	Terminal Type	Wire
	Illuminated	No
	Actuator Length	17.27mm
	Contact AC Voltage	125V ac
	Contact DC Voltage	28V dc
	Minimum Operating Temperature	71°C
	Switch Configuration	On-On
	Maximum Operating Temperature	-65°C
	Width	33.5mm
	Standards/Approvals	CSA, CE, UL
	Series	TL
	Length	30mm
	Height	26.7mm

	Alles selecteren
	Merk Honeywell
	Contact Configuration DPDT
	Product Type Toggle Switch
	Switch Operation On-On
	Switch Contact Current 20A
	Mount Type Bushing
	Terminal Type Wire
	Illuminated No
	Actuator Length 17.27mm
	Contact AC Voltage 125V ac
	Contact DC Voltage 28V dc
	Minimum Operating Temperature 71°C
	Switch Configuration On-On
	Maximum Operating Temperature -65°C
	Width 33.5mm
	Standards/Approvals CSA, CE, UL
	Series TL
	Length 30mm
	Height 26.7mm

Datasheet - 102TL2-3

N.v.t.

Honeywell Series TL Toggle Switch, 20A Switch Contact Current, 125V AC Contact Ac Voltage - 102TL2-3

This toggle switch provides a compact, manual switching solution for industrial and electronic control panels, offering a two-position changeover for dual-circuit control. It is designed for panel mounting with a bushing arrangement and is suited to environments where a non‑illuminated, mechanically simple selector is required.

Features and Benefits:

• DPDT contact arrangement enables switching of two separate circuits simultaneously
• Rated for 20A current to support higher-load circuits
• 125V AC contact rating for mains‑level switching applications
• 28V DC contact rating for low‑voltage control circuits
• IWTS Terminal style for robust and secure wire connection
• Operable between -65°C and 71°C for wide ambient temperature use

Applications

• Suitable for motor control panels requiring dual‑pole switching
• Ideal for changeover in industrial machinery control circuits
• Used with generator transfer systems for circuit selection
• Can be used for manual isolation in test rigs and benchtop setups
• Suitable for electrical distribution boards needing Compact selectors

What mounting arrangement is required for installation?

The component uses a bushing mount so it fits through a panel cut‑out and secures externally.

How does the actuator size affect usability?

The 17.27mm actuator length provides a clear tactile lever for positive manual operation without excessive protrusion.

Which approvals indicate its suitability for regulated installations?

It holds approvals from recognised standards bodies including CSA, CE and UL, indicating compliance with multiple certification regimes.

Is the switch illuminated for status indication?

No, the unit is non‑illuminated and relies on mechanical position for state identification.

What switching action is provided by the mechanism?

It offers an On‑On operation allowing two stable positions for alternate circuit connection.