OPTIBELT 250 XL 037 Timing Belt 125 Teeth, 635 mm Length, 9.4 mm Width
- RS-stocknr.:
- 204-3187
- Fabrikantnummer:
- 250 XL 037
- Fabrikant:
- OPTIBELT
Ontvang bulkkorting
Voeg 5 meer toe om 4% te besparen
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 6,24
(excl. BTW)
€ 7,55
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 9 stuk(s) vanaf 16 november 2026
- Plus verzending 42 stuk(s) vanaf 17 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 1 - 4 | € 6,24 | - |
| 5 - 9 | € 5,98 | 4% |
| 10 - 24 | € 5,85 | 6% |
| 25 + | € 5,76 | 7% |
*prijsindicatie
- RS-stocknr.:
- 204-3187
- Fabrikantnummer:
- 250 XL 037
- Fabrikant:
- OPTIBELT
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | OPTIBELT | |
| Product Type | Timing Belt | |
| Belt Section | XL | |
| Pitch | 5.08mm | |
| Number of Teeth | 125 | |
| Cord Material | Glass | |
| Material | Rubber | |
| Series | ZR | |
| Belt Width | 9.4mm | |
| Belt Length | 635mm | |
| Minimum Operating Temperature | -30°C | |
| Pitch Length | 5.08mm | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | ISO 5296/ISO 5294 | |
| Alles selecteren | ||
|---|---|---|
Merk OPTIBELT | ||
Product Type Timing Belt | ||
Belt Section XL | ||
Pitch 5.08mm | ||
Number of Teeth 125 | ||
Cord Material Glass | ||
Material Rubber | ||
Series ZR | ||
Belt Width 9.4mm | ||
Belt Length 635mm | ||
Minimum Operating Temperature -30°C | ||
Pitch Length 5.08mm | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals ISO 5296/ISO 5294 | ||
The Optibelt Timing Belt has 635mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 635mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
Gerelateerde Links
- Contitech 250 XL 037 Timing Belt 125 Teeth, 635 mm Length, 9.4 mm Width
- OPTIBELT 250 DXL 037 Double Sided Timing Belt 125 Teeth, 635 mm Length, 9.4 mm Width
- OPTIBELT 126 XL 037 Timing Belt 63 Teeth, 320 mm Length, 9.4 mm Width
- OPTIBELT 128 XL 037 Timing Belt 64 Teeth, 325.1 mm Length, 9.4 mm Width
- OPTIBELT 106 XL 037 Timing Belt 53 Teeth, 269.24 mm Length, 9.4 mm Width
- OPTIBELT 194 XL 037 Timing Belt 97 Teeth, 492.7 mm Length, 9.4 mm Width
- OPTIBELT 320 XL 037 Timing Belt 160 Teeth, 812.8 mm Length, 9.4 mm Width
- OPTIBELT 514 XL 037 Timing Belt 257 Teeth, 1.3056 m Length, 9.4 mm Width