OPTIBELT 160 XL 037 Timing Belt, 80 Teeth, 406.4mm Length, 9.4mm Width
- RS-stocknr.:
- 204-3181
- Fabrikantnummer:
- 160 XL 037
- Fabrikant:
- OPTIBELT
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 5,17
(excl. BTW)
€ 6,26
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 1 stuk(s) vanaf 22 december 2025
- Plus verzending 51 stuk(s) vanaf 22 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 5,17 |
| 5 - 9 | € 4,97 |
| 10 - 24 | € 4,85 |
| 25 + | € 4,77 |
*prijsindicatie
- RS-stocknr.:
- 204-3181
- Fabrikantnummer:
- 160 XL 037
- Fabrikant:
- OPTIBELT
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | OPTIBELT | |
| Length | 406.4mm | |
| Width | 9.4mm | |
| Pitch | 5.08mm | |
| Number of Teeth | 80 | |
| Profile | XL | |
| Material | Rubber | |
| Series | ZR | |
| Tooth Height | 1.3mm | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | +100°C | |
| Alles selecteren | ||
|---|---|---|
Merk OPTIBELT | ||
Length 406.4mm | ||
Width 9.4mm | ||
Pitch 5.08mm | ||
Number of Teeth 80 | ||
Profile XL | ||
Material Rubber | ||
Series ZR | ||
Tooth Height 1.3mm | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature +100°C | ||
The Optibelt Timing Belt has 406mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 406mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
Gerelateerde Links
- SKF PHG 160-XL-037 Timing Belt, 80 Teeth, 406.4mm Length, 9.4mm Width
- OPTIBELT 160 DXL 037 Double Sided Timing Belt, 80 Teeth, 406.4mm Length, 9.4mm Width
- OPTIBELT 320 XL 037 Timing Belt, 160 Teeth, 812.8mm Length, 9.4mm Width
- Contitech 160 XL 037 Timing Belt, 80 Teeth, 406.5mm Length, 9.4mm Width
- OPTIBELT 70 XL 037 Timing Belt, 35 Teeth, 177.8mm Length, 9.4mm Width
- OPTIBELT 380 XL 037 Timing Belt, 190 Teeth, 965.2mm Length, 9.4mm Width
- OPTIBELT 322 XL 037 Timing Belt, 161 Teeth, 819.2mm Length, 9.4mm Width
- OPTIBELT 340 XL 037 Timing Belt, 170 Teeth, 863.6mm Length, 9.4mm Width