OPTIBELT 600 H 150 Timing Belt 120 Teeth, 1.524 m Length, 38.1 mm Width
- RS-stocknr.:
- 204-2903
- Fabrikantnummer:
- 600 H 150
- Fabrikant:
- OPTIBELT
Ontvang bulkkorting
Voeg 5 meer toe om € 12,30 te besparen
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 61,39
(excl. BTW)
€ 74,28
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 01 februari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 1 - 4 | € 61,39 | - |
| 5 - 9 | € 58,93 | € 12,30 |
| 10 - 24 | € 57,71 | € 36,80 |
| 25 + | € 56,47 | € 123,00 |
*prijsindicatie
- RS-stocknr.:
- 204-2903
- Fabrikantnummer:
- 600 H 150
- Fabrikant:
- OPTIBELT
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | OPTIBELT | |
| Product Type | Timing Belt | |
| Belt Section | H | |
| Pitch | 12.7mm | |
| Number of Teeth | 120 | |
| Cord Material | Fibreglass | |
| Material | Rubber | |
| Series | ZR | |
| Minimum Operating Temperature | -30°C | |
| Belt Width | 38.1mm | |
| Pitch Length | 12.7mm | |
| Belt Length | 1.524m | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | ISO 5296/ISO 5294 | |
| Alles selecteren | ||
|---|---|---|
Merk OPTIBELT | ||
Product Type Timing Belt | ||
Belt Section H | ||
Pitch 12.7mm | ||
Number of Teeth 120 | ||
Cord Material Fibreglass | ||
Material Rubber | ||
Series ZR | ||
Minimum Operating Temperature -30°C | ||
Belt Width 38.1mm | ||
Pitch Length 12.7mm | ||
Belt Length 1.524m | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals ISO 5296/ISO 5294 | ||
The Optibelt Timing Belt has 1524mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 1524mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
Gerelateerde Links
- OPTIBELT 600 DH 150 Double Sided Timing Belt 120 Teeth, 1524 mm Length, 38.1 mm Width
- SKF PHG 600-H-150 Timing Belt 120 Teeth, 1524 mm Length, 38.1 mm Width
- OPTIBELT 600 H 200 Timing Belt 120 Teeth, 1524 mm Length, 50.8 mm Width
- OPTIBELT 600 H 100 Timing Belt 120 Teeth, 1524 mm Length, 25.4 mm Width
- OPTIBELT 600 H 075 Timing Belt 120 Teeth, 1524 mm Length, 19.1 mm Width
- OPTIBELT 600 H 300 Timing Belt 120 Teeth, 1524 mm Length, 76.2 mm Width
- OPTIBELT 600 DH 075 Double Sided Timing Belt 120 Teeth, 1524 mm Length, 19.1 mm Width
- OPTIBELT 600 DH 100 Double Sided Timing Belt 120 Teeth, 1524 mm Length, 25.4 mm Width