EXACT Threading Tap, M8 Thread, 1.25mm Pitch, Metric Standard
- RS-stocknr.:
- 499-330
- Fabrikantnummer:
- 4405925
- Fabrikant:
- EXACT
21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Prijs Per stuk
€ 18,23
(excl. BTW)
€ 22,06
(incl. BTW)
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 18,23 |
- RS-stocknr.:
- 499-330
- Fabrikantnummer:
- 4405925
- Fabrikant:
- EXACT
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- BG
Productomschrijving
SGE-Bit HSS TIN Combi Tool
Combined HSS TIN single-cut tap with spiral flute and 1/4" hex drive
Deburring zone with edge breaker
For core drilling, thread cutting and deburring in a single process
Crosswise grinding, drills do not drill off-centre — even without centre-punching
Suitable for construction steel, CrNi steel, non-ferrous metals and plastics
Deburring zone with edge breaker
For core drilling, thread cutting and deburring in a single process
Crosswise grinding, drills do not drill off-centre — even without centre-punching
Suitable for construction steel, CrNi steel, non-ferrous metals and plastics
Specificaties
Kenmerk | Waarde |
|---|---|
| Thread Size | M8 |
| Set Type | Threading Tap |
| Type | Spiral Flute |
| Pitch | 1.25mm |
| Thread Standard | Metric |
| Thread Direction | Right Hand |
| Number of Pieces | 1 |
| Overall Length | 50 mm |
| Material | HSS |
| Shank Diameter | 0.25 in |
| For Use With | 825-25 |