Honeywell HIH-4000 Series Humidity Sensor, Analogue Output, Through Hole Mount, Analogue, ±3.5%RH, 3 Pins

RS-stocknr.:: 874-4562
Fabrikantnummer:: HIH-4000-004
Fabrikant:: Honeywell

Honeywell HIH-4000 Series Humidity Sensor, Analogue Output, Through Hole Mount, Analogue, ±3.5%RH, 3 Pins

Subtotaal (1 eenheid)*

€ 60,30

(excl. BTW)

€ 72,96

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Beperkte voorraad

105 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 60,30

*prijsindicatie

RS-stocknr.:: 874-4562
Fabrikantnummer:: HIH-4000-004
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Sensor Function	Humidity Sensor
	Output Type	Analogue
	Interface Type	Analogue
	Accuracy	±3.5%RH
	Mounting Type	Through Hole
	Pin Count	3
	Operating Temperature Range	-40 → +85 °C
	Minimum Operating Temperature	-40 °C
	Maximum Operating Temperature	+85 °C
	Minimum Operating Supply Voltage	4 V
	Maximum Operating Supply Voltage	5.8 V
	Package Type	SIP
	Length	4.17mm
	Series	HIH-4000
	Height	8.59mm
	Width	2.03mm
	Dimensions	4.17 x 2.03 x 8.59mm
	Sensor Gain	-4mV/°C

	Alles selecteren
	Merk Honeywell
	Sensor Function Humidity Sensor
	Output Type Analogue
	Interface Type Analogue
	Accuracy ±3.5%RH
	Mounting Type Through Hole
	Pin Count 3
	Operating Temperature Range -40 → +85 °C
	Minimum Operating Temperature -40 °C
	Maximum Operating Temperature +85 °C
	Minimum Operating Supply Voltage 4 V
	Maximum Operating Supply Voltage 5.8 V
	Package Type SIP
	Length 4.17mm
	Series HIH-4000
	Height 8.59mm
	Width 2.03mm
	Dimensions 4.17 x 2.03 x 8.59mm
	Sensor Gain -4mV/°C

HIH-4000/4020/4021 Series Humidity Sensors, Honeywell

The HIH-4000 series has been specifically designed for use in high volume OEM (Original Equipment Manufacturer) applications. These sensors utilise a near linear voltage output making direct input to a controller or other devices possible. They are ideally suited for low drain, battery operated systems with a typical current draw of only 200 μA. Potential Applications:Refrigeration equipmentHVAC equipmentMedical equipmentDryingMeteorologyBattery-powered systemsOEM assemblies

Features:Moulded thermoset plastic housingNear linear voltage output vs %RHLaser-trimmed interchangeabilityEnhanced accuracy, fast responseFast response timeStable, low drift performanceChemically resistant

Honeywell Humidity Sensor, 3 Pin, 5.8V - HIH-4000 Series - HIH-4000-004

This humidity sensor from Honeywell uses a clever SIP (system-in-package) design to keep it compact. Its small size of 4.17 (length) by 2.03mm (width) means it fits in where space is tight. The sensor is a highly efficient and accurate component. It's laser-trimmed and uses a capacitive sensing element and integrated signal conditioning for a quick and reliable response. The linear voltage output draws a current of just 200μA (microamps), making it a low-power component that's well-suited to battery-operated devices. This humidity sensor has a moulded and layered thermoset plastic case to make it chemical, oil and dust resistant for a long service life.

Features & Benefits

• Through-hole mounting for quick and secure installation on PCBs (printed circuit boards)
• Wide operating temperature range of -40°C to +85°C for use in extreme conditions or outdoors
• Works with supply voltages between 4 and 5.8V for greater flexibility

Applications

• OEM (original equipment manufacturer) assemblies
• Refrigeration and HVAC (heating, ventilation and air conditioning) equipment
• Measurement and control systems

What conditions is this sensor calibrated to?

This device is calibrated at 5V DC and +25ºC, ready for immediate installation in your controller or device under normal conditions.

Temperature & Humidity Sensors, Honeywell