The P.M.A KS40 series temperature controller has a supply voltage rating ranging from 90VAC to 250VAC. This high precision controller has a width of 48mm and a height of 96mm(1/8DIN). It has three process outputs that are three relays and two digital inputs and transmitter power supply. The controller unit that provides simple, 2-point (ON/OFF) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analogy input can be used for heating current measurement or as an external setpoint input. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a 2-wire transmitter. Inclusions: German manual.
Features and Benefits
Automatic/manual key BluePort front interface and blue control software Extended limit signalling function with latch It has flat pin connector Maintenance manager and error list Monitoring of heating current and input circuit Timer and programmer
Applications
2 and 3 point control 2-stage burners 3-stage burners Boiler pressure control Burners and boilers Furnaces and ovens Modulating burners Plastics processing and driers Position control Synchronisation control Weather-compensation
Certifications
Front panel IP65 rated Housing IP20 rated Terminals IP00 rated Type tested to EN 14597 (replaces DIN 3440) UL approved
Kenmerk
Waarde
Supply Voltage
90 → 250 V ac
Size
96 x 48 (1/8 DIN)mm
Number of Outputs
2
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Temperature Range
0 → +1760 (Type R Thermocouple) °C, 0 → +1760 (Type S Thermocouple) °C, -100 → +1200 (Type J Thermocouple) °C, -100 → +1300 (Type N Thermocouple) °C, -100 → +1350 (Type K Thermocouple) °C, -100 → +900 (Type L Thermocouple) °C, -200 → +850 (PT1000) °C
The P.M.A KS40 series temperature controller has a supply voltage rating ranging from 90VAC to 250VAC. This high precision controller has a width of 48mm and a height of 96mm(1/8DIN). It has three process outputs that are three relays and two digital inputs and transmitter power supply. The controller unit that provides simple, 2-point (ON/OFF) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analogy input can be used for heating current measurement or as an external setpoint input. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a 2-wire transmitter. Inclusions: German manual.
Features and Benefits
Automatic/manual key BluePort front interface and blue control software Extended limit signalling function with latch It has flat pin connector Maintenance manager and error list Monitoring of heating current and input circuit Timer and programmer
Applications
2 and 3 point control 2-stage burners 3-stage burners Boiler pressure control Burners and boilers Furnaces and ovens Modulating burners Plastics processing and driers Position control Synchronisation control Weather-compensation
Certifications
Front panel IP65 rated Housing IP20 rated Terminals IP00 rated Type tested to EN 14597 (replaces DIN 3440) UL approved
Kenmerk
Waarde
Supply Voltage
90 → 250 V ac
Size
96 x 48 (1/8 DIN)mm
Number of Outputs
2
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Temperature Range
0 → +1760 (Type R Thermocouple) °C, 0 → +1760 (Type S Thermocouple) °C, -100 → +1200 (Type J Thermocouple) °C, -100 → +1300 (Type N Thermocouple) °C, -100 → +1350 (Type K Thermocouple) °C, -100 → +900 (Type L Thermocouple) °C, -200 → +850 (PT1000) °C