P.M.A KS Panel PID Temperature Controller, 4 Output Relay 260V On-Off

Subtotaal (1 eenheid)*

€ 758,12

(excl. BTW)

€ 917,33

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 1 stuk(s) vanaf 23 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 758,12

*prijsindicatie

RS-stocknr.:
607-9248
Fabrikantnummer:
KS92-112-0000D-011
Fabrikant:
P.M.A
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

P.M.A

Product Type

PID Temperature Controller

Output Type

Relay

Number of Outputs

4

Maximum Operating Temperature

60°C

Minimum Operating Temperature

0°C

Control Type

On-Off

Maximum Supply Voltage

260V

Auxiliary Power Supply

22 mA, 18 V

Diagnostics

Internal Fault, Eeprom, Latched Limit Messages, Sensor Break Or Short Circuit, Fault During Self-Tuning, Basic Diagnostic Functions, Maintenance Interval Of Actuator, Control Loop Alarm, Maintenance Manager and Error List, Re-Calibration Warning, Heating Current Alarm

Digital Comms

PROFIBUS-DP Interface, RS422/RS485/Modbus RTU

Maximum Voltage

250V

Display Type

LED, Multi Line

IP Rating

IP65, IP20, IP00

Standards/Approvals

EN 61326-1 EMC, cULus, EN 61010-1 (VDE 0411-1), EN 14597 (replaces DIN 3440)

Length

118mm

Width

48 mm

Series

KS

Mount Type

Panel

Input Type

Thermocouple, Potentiometer, Current, Voltage, Inp2, Universal Input

Panel Depth

118mm

Vrijgesteld

Land van herkomst:
GB

PMA KS 92-1 Temperature Controller


The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.

The process value signal is connected via a universal input. A supplementary analogue input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.

The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.

The KS 92-1 is particularly suited to the following applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.

• BluePort®

• Front interface and BlueControl software

• Maintenance manager and error list

• Two universal inputs

• Day & Night display shows plain text and bargraphs

• Manual gain scheduling

• Self-Tuning to the setpoint without oscillation

• Valve controller with position feedback and DAC monitoring

• 3-point controller for water, fan and oil cooling

• Type tested to EN 14597 (replaces DIN 3440) and cULus

• High-impedance mV input for O2 sensors

PMA Temperature Controllers


Gerelateerde Links